Jump to content
SAU Community

Recommended Posts

Hi, I was hoping some of you might be able offer some ideas for my s1 R33 GTST......It has smashed the waterpump housing working fairly hard near the limiter, basicly ter was a loud clunk noise an on inspection the water pump alloy housing has broken an half an the fan has taken out the rad....... I cant work out for sure what has happened but I need to make sure its fixed so it dosnt happen again especcialy after i replace the busted bits.......and help/advice would be greatly appreciated....cheers

Link to comment
https://www.sau.com.au/forums/topic/351631-smashed-water-pump/
Share on other sites

if your not competent enough to pull down the front end, observe whats broken and replace it then i suggest you find a mechanic you can rely on - preferrably a performance workshop who works with RB's regularly.

a new water pump should do the trick but we cant really tell you much else unless we can see what has happened.

how many km's has the car done and how hard do you drive it? the water pump probably hasn't been replaced ever and has seized hard at redline causing it to destroy itself. pull all the damaged stuff off, check your water gallery for damage. check your threads in the holes that the water pump bolts into for damage.

I do drive it pretty hard an I suppose it is a failure due to being old, I was hoping that it was not another mech issure that led to its demise.......ill put in a new rad n water pump an see how it goes....cheers

how many km's has the car done and how hard do you drive it? the water pump probably hasn't been replaced ever and has seized hard at redline causing it to destroy itself. pull all the damaged stuff off, check your water gallery for damage. check your threads in the holes that the water pump bolts into for damage.

as said replace everything thats broken. also check everything to do with that belt and make sure theres nothing thats gonna make it die again, such as a seized pulley.

[/qu

Yea ill inspect all when I replace all the busted bits.....cheers mate

english?

are you saying you were bashing limiter and then the water pump exploded taking out the clutch fan and the radiator?

if you cant explain what happened put up pics, by the sounds of it you will 'at least' be needing a new water pump $130, radiator and clutch fan.

was your car overheating before this? how many k's has it done, check oil pump and timing belt while ur at it

  • 4 weeks later...

Just to add to this thread, i just installed new turbor on my car, chech the tune and bring the car on boost, bang, checed and water running everywhere, upon further inspection the water pump has a huge crack, the fan hit the fan shroud and destroyed it, radiator is ok. The pump broke in the direction of the belt pulling on the pully.

I havn't heard of this before, I will remove the pump assembly soon, see what caused it.

I'm not after an answer, just letting people know this can happen, will report back if i find a good cause to the breakage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...