Cluster Help

[I8EE]

Hi All,

I'm looking for info on the cluster, specifically what the wire pin outs are. Basically I need to know what wire does what leading from the harness on the back of the cluster. Ive been scouring the net for some thing but I've had no luck.

mostly, i need the RPM signal wire off the cluster. . . need to hook it up from there, back to my ecu. . .

Any info would be greatly appreciated.

Thanks in advance.

Edited February 7, 2011 by I8EE

[jiffo]

I pinned these out years back for an R32 GTSt.

Might help.

[I8EE]

Perfect! thanks heaps dude

[I8EE]

ive got a microtech. so i connected the rpm tacho output to a wire which i ran to the tacho signal at the back of the cluster.

fairly simple i thought, but the tacho still isnt working?

just a thought but, does the tacho need resistors or anything in the line???

Edited February 8, 2011 by I8EE

[jackrose01]

I see the problem, vg00 startup disk when creating a node in the cluster from the "Day " vg00 from another node cluster. The problem is, VGID (volume group ID) is the same on both servers vg00 disk. When a node changes to vg00, not the other.

[R.3.2.G.T.R]

u sure u connected it right?? from memory, the back of the cluster for tacho signal will say TAM