Jump to content
SAU Community

Recommended Posts

Hi Guys,

I am currently looking for an R34 GTR Vspec II Nur and would like some knowledge from those of you which have purchased one or can just provide some good info.

I would prefer to purchase from within Aus as I have heard too many negative comments about importing. But I haven't completely ruled out importing.

I'm after a White GTR with relatively low km's (maybe around the 50K mark), with service history and in immaculate condition.

So far I have only found one in Aus (QLD) for $75K, although it does not have service history and the guy sold the original wheels and replaced them with some crap yellow wheels.

What is a good price to pick up one of these beasts for?

Would you recommend import since these cars are so rare to come across?

Do you know anyone who is selling a Nur?

Would it be better to buy a standard Vspec II for around $60K and spend a few bux to enhance?

Would appreciate some info. If there is anything I am asking which has previously been covered in another thread please let me know.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/354790-looking-for-r34-gtr-vspec-ii-nur/
Share on other sites

Nur will be almost impossible to do for 50K mark and i am talking about importing here

was going through the auctions not long ago for a V-Spec

so i sort of know the prices and very few Nur go via auction and there are bloody expensive

you can get V-Spec 2 for that money if you wait a bit of time

If only you could stretch the budget a little..

http://www.skylinesa..._1#entry5656336

:worship:

Very nice car but a little too modded. Hoping to fine a bone stock nur or with minimal mods.

i sold mine for 65k and it was pretty immac.

at the end of the day nur is just wank factor id rather a vspec 2 with a strong engine and some power, brakes and other little things which is achievable with ur budget.

and M Spec is gay so is millenium jade haha

Edited by SRB

i sold mine for 65k and it was pretty immac.

at the end of the day nur is just wank factor id rather a vspec 2 with a strong engine and some power, brakes and other little things which is achievable with ur budget.

and M Spec is gay so is millenium jade haha

Yeah I have to agree with you about M spec and millenium jade.

I saw pics of your car...maybe the guy you sold it to wants to sell :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...