Jump to content
SAU Community

Replica Bride Low Max Seat

DC33VN
 Share

Recommended Posts

DC33VN Experienced

DC33VN

Posted
Posted

Hi guys i just purchased my new car and it comes with r33 gtr seats so there is no need for my bride seat anymore.

The seat is brand new has not been fitted to any car and has only been sat in once to see how it was.

The seat comes with universal rails that fit alot of cars.

Its a china copy but is made of good quality and is down to the exact detail as the real thing with the bride imprint on the metal on the sides.

I had bought 2 and sold one thinking id put only one in my car but seeing as it comes with 33 gtr seats that are more comfy id rather have the gtr seats.

Im looking at $750 for the seat seeing as they cost me much more for shipping and clearing customs when i had brought both in.

post-60031-0-78085700-1298588454_thumb.jpg

post-60031-0-21985500-1298588493_thumb.jpg

post-60031-0-06176300-1298588551_thumb.jpg

post-60031-0-94571500-1298588591_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/355150-replica-bride-low-max-seat/
Share on other sites
DC33VN Experienced

DC33VN

Posted
  • Author
Posted

yeah it holds real well... put it this way its abit tight for me but shes all sweet and i wouldn't have a clue you would need to see if the rails line up but you can always put the r32 rails on the seat

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...