Jump to content
SAU Community

Recommended Posts

$36,000

Maybe intrested in swaps + cash

Fresh engine 2 events since rebuild aprox 5,000km

Car currently running 365awkw with over 1400nm toque

Current tune is for mid range power delivery will make 400kw on power tune.

Everything has been done that needs to be done and all parts are basically new or are new!

Car has current 3 months SA rego

Comes with lots spares and std parts like std exhaust system.

Car as been modified from standard by myself and I have been the first owner of the car in Australia.

Top competitor in legend of the lakes hill climb also took out the overall dyno challenge at autofest 2010 Mount Gambier.

Car has barley been driven since build and is going to waist. Car was built on the basis of doing hill climbs and some track work but never seen a track yet.

Engine

Arp main bolt’s

Arp head studs

Arp rod bolts

Tomei Metal head gasket

Tomei Metal intake gaskets

Tomei Metal exhaust gaskets

ATi 1000hp balancer

Trust Oil pump

Tomei oil restrictor

Eagle rods

CP pistons

ACL race bearing throughout

Trust sump

Gready under drive pullys

N1 water pump

Nismo thermo stat

SARD 800cc

Head ported and polished

Tomei poncams B

Tomei pro double valve springs

Tomei titanium valve retainers

Nismo fuel regulator

Silicon high temp water hose set

HKS twin spark ignition

Gready solid radiator hoses

Gready oil cooler/ filter relocation

Custom hard piping kit intake/cooler

CoolingPro Intercooler

Blitz dual bovs

Twin Z32 Air flow meters

PFC Pro version with launch control and ignition cut

Braided turbo oil and water lines

Yellow jackets coil packs

HKS cam gears

OBX split dumps

Std turbo manifolds with major porting

Garret -5 turbos

kokamoto race twin 3" pipes tuned length from dumps back

justjap circuit oil catch can into a secondary custom catch can

Apexi air filters

Custom 3 core alloy radiator

Custom sure tank with bosh 044

Drivetrain

Nismo Engine mounts

Nismo Gearbox mounts

custom cusco 30mm swaybars

project D rear cradle solid bushes

project D steering rack bushes

Twin place ORC 702 clutch

Nismo short shifter

Rear adj upper camber arms

Upper front adj camber arms

Hardline caster rods

Hicas lock out bar

Front Two peice slotted rotors

Slotted rear rotors

Yellow stuff pads all round

Project mu drift handbrake pads

Braded brake lines all round

Cusco brake stopper

Tein coilovers with full in cab control

Rear LSD shimmed

Interior

6 point molly bolt in cage with full padding wrap

Nismo 320 dash

Nismo Gear knob

Fire extinguisher

Quick release steering wheel hub

Momo race wheel

Defi Gauges Oil temp/ Water temp/ Boost bar

Led shift light

Greedy turbo timer

Profec b boost controller

Exteriour

Front Bar on speed clips for quick removal

Top secret carbon rear defuzer

Top secret front add on lip

F1 carbon mirrors

BeeR carbon rear spoiler

Top secret carbon bonnet

Top secret front splitter

Tomei headlight air duct

Zigen 18x9.5 rims on 265x35x18 semi slicks advans A048

I am located in Melbourne and car is currently here.

I have driven the car a total of about 5 times this year and has always been garaged under a cover.

Engine was built a year ago by Protek Automotive in Preston and last tune was done 3 months ago with a new HKS twin spark system.

Also this is a ser3 r33 gtr so it has the extra bits std,

tuffer gearbox

xeon headlight

red interiour inserts

dark carbon instumental pannels

n1 front bar intakes

this was the last year they where made 1998

call or msg 0416250596

Also Have the following RAYS NISMO rims 18x10 at an exta cost can be neg on finally price.

The car when it was std.

post-51272-0-15188300-1300087760_thumb.jpg

Ready to drive home or straight to the track heaps of goodies and heaps of realiable all day power.

tuned on BP98

Perfect time to buy as the Aus world time attack entrys come out!

Ready to race just jump in and go!

Decided to drop the price as I have a business deal that needs some money invested into it.

So $32,000 for a quick sale!

will be taking the car to the sau vic dyno day this weekend so if your intrested come down and check it out.

Has to go guys

Didnt make down to the SAU Dyno day got held up at PRO Flows dyno day.

Car ran in 2wd and made 402.7rwkw will post up dyno sheet soon.

dont know why no-one is interested? massive budget spend, massive brand name parts list?

worried about getting it rego'd in vic? i just about all the std parts to do it?

have std bonnet change that,

have std wing blade change that,

have full std exhaust system so change that,

have std ecu and afm's change that,

remove the bolt in cage,

get rwc and your done put it all back on?

If you from SA its right to go and drive it home!

Im really interested in a e46 M3 so looking for a swap or a nice s15 with leather + cash.

Edited by Travis Trayhern

http://www.fullboost.com.au/video.php?id=613&startRow=0&endRow=10&page=1

Second car in the video.

not the most powerfull car there but it is a circuit car not a drag cal like all of them.

  • 3 weeks later...

still up for sale, car just sitting at protek over in preston feel free to go check it out and ask them about it and its build :)

interstate buyers welcome also if you need to fly in im happy to pick you up from the airport and show you the car, if you want to drive it home will throw in a free set of earmuffs haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...