Jump to content
SAU Community

R33 Setup For Sale. Brand New

hungy81
 Share

Recommended Posts

hungy81 Enthusiast

hungy81

Posted
Posted (edited)

Hey guys i have a skyline which i owned for 4 years but i am parting all the parts. i have moved on and dont wish to continue finishing the car off. Getting old so need this car gone.

List of parts on for sale as is.. ALL BRAND NEW PARTS. NEVER DRIVEN. 0KS ON MOTOR..

R33 GTR ENGINE WITH 2.8 TOMEI STROKER KIT

HEAD HAS BEEN PORTED AND BLUEPRINTED. BLOCKS BEEN MACHINE AS

BUCKETS AND SHIMS AND VALVES ALL 1MM OVERSIZED

WELL. BY JHH IN BRISBANE QLD

HKS STAGE 3 CAMS

TOMEI CAM GEARS

TOMEI OIL PUMP

ATI HARMONIC BALANCER

HYPERTUNE PLENIUM AND FUEL RAIL AND HYPERTUNE THROTTLE BODY

SARD 1000CC INJECTORS

T88 38GK 1200HP TURBO KIT (AIR FILTER, BLOW OFF VALVE AND HOSING AND CLAMPS

MOTEC M800 ECU WITH 9 BOOST SWITCH SETTING AND 3 BAR MAP SENSOR

FULL WIRING LOOM FOR RB26DETT ON R33GTST

GREDDY MANIFOLD AND DUMP PIPES

TOMEI HEADGASKET KIT

BUDDYCLUB COILOVERS ALL ROUND

VOLK GTC FACE 2 WHEELS 18 by 8.5 front and 18 by 9.5 rear

FULL CUSTOM KIT

3 INCH HOOKER EXHAUST SYSTEM

PWR 3INCH INTERCOOLER KIT

PWR OIL COOLER KIT

PWR RADIATOR

SPITFIRE COIL PACKS

3 DEFI GAUGES MOUNTED ON PASSENGER SIDE DASH WITH UNIT

APEXI TURBO TIMER

GREDDY PROFEC B BOOST CONTROLLER

2 WALBRO EXTERNAL FUEL PUMPS

BRAIDED LINES THROUGHOUT THE CAR AND UNDERNEATH THE CAR

ROLL CAGE PADDED

RECARO SEATS WITH RAILS

ROCKFORD FOSGATE COMPLETE SOUND SYSTEM

CUSTOM SURGE TANK MOUNTED UNDERNEATH REAR BAR WITH ALL BRAIDED LINES

FROM WHAT I HAVE TOLD. SPEND ANOTHER 10K ON THIS CAR AND U WILL HAVE 1000HP REAR WHEEL DRIVE R33 SKYLINE

THE LIST GOES ON AND ON. THE WORKSHOP HAS RECIEPTS FOR ALL THE WORK DONE TO THIS CAR.

CAR IS LOCATED IN BRISBANE QLD.

MOTOR ALONE WAS 30K TO BUILD. STROKED MACHINE AND PORTED

ONLY SERIOUS BUYERS ONLY

OFFERS

RING ME ON 0423451393 FOR MORE DETAILS

ALL PARTS LOCATED IN BRISBANE

Edited by hungy81
Link to comment
https://www.sau.com.au/forums/topic/357651-r33-setup-for-sale-brand-new/
Share on other sites
hungy81 Enthusiast

hungy81

Posted
  • Author
Posted (edited)

Hey guys i have a skyline which i owned for 4 years but i am parting all the parts. i have moved on and dont wish to continue finishing the car off. Getting old so need this car gone.

List of parts on for sale as is.. ALL BRAND NEW PARTS. NEVER DRIVEN. 0KS ON MOTOR..

R33 GTR ENGINE WITH 2.8 TOMEI STROKER KIT

HEAD HAS BEEN PORTED AND BLUEPRINTED. BLOCKS BEEN MACHINE AS

BUCKETS AND SHIMS AND VALVES ALL 1MM OVERSIZED

ENGINE WORK DONE BY JHH IN BRISBANE SLACKS CREEK, QLD

HKS STAGE 3 CAMS SHAFTS

TOMEI CAM GEARS

TOMEI OIL PUMP

TOMEI BAFFLE PLATE IN SUMP

CUSTOM SUMP TO RUN ONLY REAR WHEEL DRIVE

ATI HARMONIC BALANCER

HYPERTUNE PLENIUM AND HYPERTUNE FUEL RAIL AND HYPERTUNE THROTTLE BODY

SARD 1000CC INJECTORS

T88 38GK 1200HP TURBO KIT (AIR FILTER, BLOW OFF VALVE AND HOSING AND CLAMPS

MOTEC M800 ECU WITH 9 BOOST SWITCH SETTING AND 3 BAR MAP SENSOR

FULL WIRING LOOM FOR RB26DETT ON R33GTST

GREDDY MANIFOLD AND DUMP PIPES

TOMEI HEADGASKET KIT

BUDDYCLUB COILOVERS ALL ROUND

VOLK GTC FACE 2 WHEELS 18 by 8.5 front and 18 by 9.5 rear

FULL CUSTOM BODYKIT

3 INCH HOOKER EXHAUST SYSTEM WITH HKS DRAGGER TIP

PWR 3INCH INTERCOOLER KIT

PWR OIL COOLER KIT

PWR RADIATOR

SPITFIRE COIL PACKS

3 DEFI GAUGES MOUNTED ON PASSENGER SIDE DASH WITH UNIT

APEXI TURBO TIMER

GREDDY PROFEC B BOOST CONTROLLER

2 WALBRO 044'S EXTERNAL FUEL PUMPS ON SURGETANK

BRAIDED LINES THROUGHOUT THE CAR AND UNDERNEATH THE CAR

ROLL CAGE PADDED

RECARO SEATS WITH RAILS

ROCKFORD FOSGATE COMPLETE SOUND SYSTEM

JVC DOUBLE DIN HEADUNIT

TINTED WINDOWS

DOLUCK SIDE SKIRTS

ADR APPROVED FIBREGLASS VENTED BONNET

DOLUCK REAR BAR WITH DIFFUSER

MSPORT FRONT BAR

DBA FRONT AND REAR SLOTTED ROTORS WITH FRONT EBC GREEN PADS

PAINT JOB DONE BY DMD THE IMAGE CHERRY BLACK

CUSTOM SURGE TANK MOUNTED UNDERNEATH REAR BAR WITH ALL BRAIDED LINES

CAR ISNT FINISHED YET. SPEND ANOTHER 10K ON THIS CAR AND U WILL HAVE 1000HP REAR WHEEL DRIVE R33 SKYLINE

NEED GEARBOX OFF UR CHOICE AND CUSTOM TAILSHAFT TO HANDLE THAT POWER AND FEW BITS AND PIECES. ALL ADDS UP

THE LIST GOES ON AND ON. THE WORKSHOP HAS RECIEPTS FOR ALL THE WORK DONE TO THIS CAR.

CAR IS LOCATED IN BRISBANE QLD.

MOTOR ALONE WAS 30K TO BUILD. STROKED MACHINE AND PORTED

ONLY SERIOUS BUYERS ONLY

OFFERS

RING ME ON 0423451393 FOR MORE DETAILS

CAR CAN BE VIEWED IN PERSON AT 101 MOTORSPORT SLACKS CREEK

ALL PARTS LOCATED IN BRISBANE

Edited by hungy81
Blitz Grand Master

Blitz

Posted
Posted

Thread closed.

This is the parts and accessories FS area.

If you are selling the car as a whole, please open a new thread in the Whole Cars for sale section, and include an asking price and more information about the car itself.

Asking for offers without stating a price is not permitted.

Thanks.

Admin

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...