Jump to content
SAU Community

Recommended Posts

I've started looking into graphics cards and have been wondering whether to go a high end older card or a mid-range newer card.

One factor is the directx support. I had no idea what the difference was until I stumbled across this thread (yes, it's from 2009) that explains and shows the differences very well.

http://www.overclock...-vs-dx-9-a.html

I tried using the ol' search button but didn't find anything explaining the differences.

Here are some pics of the same scene, but under the different versions.

post-51176-0-87321700-1300341311_thumb.jpg

post-51176-0-50216500-1300341329_thumb.jpg You'll notice that the differences between DX9 and 10 are minimal with only better shading and light

post-51176-0-42146100-1300341362_thumb.jpg DX11 is like a whole different league; more 3Dness so to speak - the biggest change is the detail in the road.

I know it's an old subject and I'm a couple of years behind but I figured it's good to know the differences. DX11 is definitely the way to go.

Windows XP - DX9 ONLY

Windows Vista - DX10 (can be updated to DX11)

Windows 7 - DX11

Link to comment
https://www.sau.com.au/forums/topic/357762-directx-11-vs-dx10-vs-dx9/
Share on other sites

i would go Dx11 no point going backwards

and something like ati 6870 1gb is pretty cheap nowadays

http://msy.com.au/product.jsp?productId=6837 $229

i can only find 1 Nvidia in a similar price range

http://msy.com.au/product.jsp?productId=7305 $277 GTX560

the 6870 is probably a higher binned 6850. So whilst it may work on most cards, there is potentially a portion that won't work after flashing it. I could be wrong though, cbf researching.

BTW that directx 11 shot seems to be showing off tesselation more than anything ;)

the 6870 is probably a higher binned 6850. So whilst it may work on most cards, there is potentially a portion that won't work after flashing it. I could be wrong though, cbf researching.

BTW that directx 11 shot seems to be showing off tesselation more than anything ;)

Well apparently that's what dx11 is all about. It's basically dx10 but with completely revamped tesselation properties.

I think instead of having multiple levels/layers of models, they have only two. Dx10 and earlier would have the lowest detailed model up close covered by the next level, covered again by another level and so on; therefore all levels are loaded for up close models even though we only see the last level/layer. Dx11 on the other hand will only load the highest detailed model close up until a certain distance and then change to the low detailed model.

6850 is same as a 6870, with minor diffs, but you reflash bios and it works 100%, out of the 30-40ish ppl i know on the overclocking forums, all their cards work fine :)

DO IT!!!

i for one, just bought the gtx570 which just kicks pure assssss!!!

I've started looking into graphics cards and have been wondering whether to go a high end older card or a mid-range newer card.

One factor is the directx support. I had no idea what the difference was until I stumbled across this thread (yes, it's from 2009) that explains and shows the differences very well.

http://www.overclock...-vs-dx-9-a.html

I tried using the ol' search button but didn't find anything explaining the differences.

Here are some pics of the same scene, but under the different versions.

post-51176-0-87321700-1300341311_thumb.jpg

post-51176-0-50216500-1300341329_thumb.jpg You'll notice that the differences between DX9 and 10 are minimal with only better shading and light

post-51176-0-42146100-1300341362_thumb.jpg DX11 is like a whole different league; more 3Dness so to speak - the biggest change is the detail in the road.

I know it's an old subject and I'm a couple of years behind but I figured it's good to know the differences. DX11 is definitely the way to go.

Windows XP - DX9 ONLY

Windows Vista - DX10 (can be updated to DX11)

Windows 7 - DX11

in dx11 that road is retarded, theres no way anyone could walk on that without twisting an ankle

[quote name=ClutchBurndout-:(' timestamp='1300745012' post='5724470]

in dx11 that road is retarded, theres no way anyone could walk on that without twisting an ankle

Haha. Fk driving on it too. Stiff suspension + road like that = fkd spine; and forget it if your busting for a piss.

Hey guys,

I just installed a genuine copy of Windows 7 64-bit Home Premium.

I am not sure if my operating system is now running Direct X 11. How can I tell or where do I search in Windows 7 to find if it is?

My PC specs are as follows (if its of any importance) -

  • Intel Quad Core 3.2ghz
  • 4.0gb 1333mhz ram (yes I know that's sh!t, i'm upgrading to 12gb 2000mhz soon!)
  • Gigabyte 1gb graphics card (can't remember the exact model name, paid about $300 for it just over 12months ago)
  • Asus mother-board (once again can't remember specs etc)

My PC runs games such a COD: Black Cocks & Battlefield: Bad Company 2 one maximum graphics and runs both of them smooooooooth as silk, both in singleplayer & multiplayer. WoW runs perfectly smooth, you get the idea.

I'm pretty sure my graphics card is an ATI Radeon HD 4850.

It seems to perform very well, and when i had XP and the Catalyst Control Centre installed, i overclocked it and it still ran fine and didnt overheat etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...