Jump to content
SAU Community

Recommended Posts

Hey guys really getting frustrated by this engine! I have changed over spark plugs few weeks ago now and car has slowly decreased itself over couple of weeks by spitting on high revs like a rapid spitting! When listening near spark plugs there is a random spark of single or multiple sparks. The car does not idle very well and runs like a piece of shit! Running stock boost and have recently put a new exhaust on. Any ideas would be greaty appreciated!

Have done the check and all looks good.. I forgott to mention that i took the car to get looked at and they said i had water stains in the engine bay and that it needed to be dried out by running the car.. So i picked car up and thrashed it for hour n half and all problems were gone and it was running smoothe! Then next morn all the problems started again! Why?

r33 are pretty sensitive, if i were you i'de reset the ecu, you know leave the negative of your battery disconnect for a day some people reckon less, have a look into things after that. at least things will go back to stock ecu wise

just took the car for a drive then and found that its more of a bang and backfire noise. and i opened up the hood and some coil packs are still sparking while engine is running!! thats not right!

So you have no valley cover over the coilpacks? And the coil packs are bolted down on the spark plugs? If yes to both and you can see sparks, then your coilpacks are probably stuffed, the back fire noise could have been all the unburnt fuel in the exhaust.

Edited by Shazza24

where are the sparks coming from on the coilpacks?Find some one with good coil packs and switch over to see if it fixes it.

Edited by Shazza24

I fairly certain that is what it is, cos you ain't meant to see the actual spark.

South Australia has a Wanted To Borrow section not sure if anyone has some spare tho.

Edited by Shazza24

Go to supercheap and buy a small tube of high temp gasket maker silicone for about $20, take all your coils packs out, and put a good even layer of silicone on all the sides of the coilpack (not in stupid places obviously)

I did this when mine were sparking out past 4000rpm and they have not been any trouble since

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...