Jump to content
SAU Community

Recommended Posts

Yes should be fine. Just so you know all r33 gts, gtst and gts4 have the same structure and exterior panelling. Even a non turbo has pre marked holes in the engine bay for a side mount intercooler. So try posting this in the cosmetic and styling section.

Link to comment
https://www.sau.com.au/forums/topic/357815-r33-na-spoiler/#findComment-5719331
Share on other sites

Will a r33 gtr spoiler bolt straight onto a non turbo 97 r33, or do you have to put the whole boot lid on?

Careful not to get the turbo-model spoiler, though.

It'll f**k shit up if you try put that one on.

Don't ask why... you really don't want to know. Just trust me when I say to avoid those turbo-model wings.

Link to comment
https://www.sau.com.au/forums/topic/357815-r33-na-spoiler/#findComment-5724158
Share on other sites

Careful not to get the turbo-model spoiler, though.

It'll f**k shit up if you try put that one on.

Don't ask why... you really don't want to know. Just trust me when I say to avoid those turbo-model wings.

I had no problem doing it, i replaced the bootlid with the wing attached straight swap.

Link to comment
https://www.sau.com.au/forums/topic/357815-r33-na-spoiler/#findComment-5724548
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...