Jump to content
SAU Community

Want More Power

2.4skyline

By 2.4skyline,
in Engines & Forced Induction

 Share

Recommended Posts

2.4skyline Newbie

2.4skyline

Posted
Posted

Hey guys got a stock as a rock r30 skyline (1984) with the 2.4e , kinda surprised at how well it goes for an old auto but kinda wanting to get some more out of it.

Wondering what i can do without spending a fortune. I also just recently got my hands on a complete rb30 skyline, could i just go and do an engine and gearbox swap?

cheers

Link to comment
https://www.sau.com.au/forums/topic/358702-want-more-power/
Share on other sites
NISMØ Community Regular

NISMØ

Posted
Posted

You are in an NA skyline. This question has been asked 9999999999999 times.

Even if yours is an old R30, you still won't get decent power or torque (which is probably more important anyway) without spending an absolute fortune. Use your money on better things other then the engine. No if's or but's about it.

If you want power without spending ALOT of money, your only option is Nos.

If this isn't a good enough answer, look at the other 10000 topics that people have made asking the same question. Use the search bar.

Link to comment
https://www.sau.com.au/forums/topic/358702-want-more-power/#findComment-5731300
Share on other sites
  • 2 months later...
R30forasong Apprentice

R30forasong

Posted
Posted

haha Like i keep telling my brother... save your cash, get your full lisence ( if your on your P's no offence) and buy something with potential to start with... trust me its more trouble then its worth

oh come on! the old r30s go well enough with a bit of love. its not about the $$ its about the time you have to do the work... if you know how. lol.

if it already had manual trans then you can drop a heap of gear in it with not a great deal of conversion work so there! :P

Link to comment
https://www.sau.com.au/forums/topic/358702-want-more-power/#findComment-5870397
Share on other sites
Socrates Mentor

Socrates

Posted
Posted

i have the model before yours with same engine but with carburettor.

Best thing for more power imo, is converting engine to use to use a R31 RB30E Loom and ECU + Nistune Chip

Get a distributor with a CAS from a turbo L20ET or L28ET so it can see crank angle.

Then either tune so AFR's are all sweet or get a turbo manifold from a L20ET or L28ET bolt it on with a turbo and get RB30E ecu tuned to suit.

I may possibly go in this direction eventually.

Link to comment
https://www.sau.com.au/forums/topic/358702-want-more-power/#findComment-5870963
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...