Jump to content
SAU Community

Nismo Cluster Replacment Tacho Metre Not Working

Yts

By Yts,
in Exterior & Interior Styling

 Share

Recommended Posts

Yts Rising Star

Yts

Posted
Posted (edited)

hi i searched in here for this problem but posts are old like from 3-4 years ago and dont really describe what i am after.

basically i bought a nismo cluster that i tried to hook up on thursday arvo, it all attached and fitted fine, but the tacho metre does not retract back to 0 after the car has revved.is it missing a part (it doesnt have the little black peice that sits for the tacho to rest on 0 and it rests well below the numbers. anyone hand a similar problem or know how i couled fix it or inspect. i was thinking that i may be able to interchange the parts off the other cluster but not sure if that is possible as the original cluster is a gts-t

any help much appreciated

jeremy

Edited by Yts
heller44 Mentor

heller44

Posted
Posted

Clusters will work if you have a different series, but the pinouts will need changing.

Jeremy, pull it open and you should be able to glue the stop back in place with a little bit of patience. You may find it sitting in the bottom of the cluster if you are lucky.

Yts Rising Star

Yts

Posted
  • Author
Posted

fitting to an R32?

you realise there are different years of nismo cluster for different R32s?

only different clusters work only on certain R32s given their year of production

the cluster works fine all bar the tacho metre not returning to o (i believe a peice is missing), so fitment and installation isnt an issue

Clusters will work if you have a different series, but the pinouts will need changing.

Jeremy, pull it open and you should be able to glue the stop back in place with a little bit of patience. You may find it sitting in the bottom of the cluster if you are lucky.

thanks i will check into that...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...