Jump to content
SAU Community

Recommended Posts

Just purchased a set of rims for my 1995 R33 GTS-T.

I now have the standard rims with tyres which I will set for $120 for everything if anyone is keen.

Two of the Rims are in great condition with the other two with gutter scaps etc

Two tyres have 75% tread and the other two have aboiut 30% tread.

Anyway $120 is pretty cheap and I would like to see a potential buyer down at Calder Park doing burn outs till the tyres explode but I'd be happy if the owner just wants them for day-to-day use.

I'm in Melbourne so I would prefer pick up

Cheers

Link to comment
https://www.sau.com.au/forums/topic/35903-r33-standard-rims-120-melbourne/
Share on other sites

Sorry guys I should have told you where a live.

North Fitzroy (near the CBD) I also head out toward the Taylor's Lakes to see my girlfriend regularly so I could even drop them off if anyone lives out that way.

PS My girlfriend is not included in the $120.00.

The rims and tyres will be available from tonight. (get them back from the shop fitting my other wheels)

As earlier stated "Two of the Rims are in great condition with the other two with gutter scaps etc. Two tyres have 75% tread and the other two have aboiut 30% tread."

Still no offer set in stone.

$120 still stands

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...