Jump to content
SAU Community

Recommended Posts

i was pretty keen on the aluminium ones.

i like the look of them and seeing as much car is going to fully restored, id like that look under the bonnet.

ive got a 240k radiator in it atm, sime slight mods to get it to fit.

whats the difference with the 280z radiators?

well what i would do is:

get the core measurements from both of them and see if they're roughly the same. cant imagine they'd be too different. i can imagine the alloy one will be thinner.

if they arent too different and you really want the alloy one, just get it anyway and make it fit! be prepared to get a bracket made up, or drill new holes, or use zip-ties lol.

ive got the overall measurements for it, they have them on the website.

im gonna go measure my old blown out c210 radiator i have in the shed. and compare the too.

i cant see how they would be too different.

you got any ideas where i could get a c210 aluminium one?

you'd probably have to get one built. but the plus side is that they'd do all the mounting points for you.

first google search: http://www.alloyradiators.com.au/

they reckon they can make them cheaper than stock so have a go.

i have no knowledge to compare the slant type to any other sorry.

those holes they got might work too (just by looking).

email them and see if you can get the drawings for it so you can check against your car.

yeh but what do you think of the "look" of the slanted top tank.

i thnk its only like that due to the zed cars bonnet comming down on a big slant.

but i think it may look cool under the bonnet anyways??

oh as a fashion thing! i get ya now. i personally like a flat one. but i own a flat one so im biased lol

tell you what man, if you think that radiator is gunna look the beez kneez under your bonnet... then do it! it's your car and you have the creative freedom to do whatever you want with it :)

ill put something in my car that looks cool, as long as it doesnt compromise performance, practicality, or legal infringements (most of the time).

hey was just doing some work on my 210 and i remembered that photo of the one you want to get.

the pipe that comes out of the bottom tank on the alloy one comes out then shoots up on an angle. the standard c210 on just comes straight out and is real short. that might be an issue bud.

yeh man ive already emailed them about that.

although i cant see why i couldnt just "cut it off" before the bend. not to butcher it, but the pipe on the c210 radiator is only about 2 inches long, so im assuming on the 280z one, i could just shorten it before the bend.

and im not sure if i want the slanted one! :(

personally i think a flat top one would look better.

if you cut it off, dont forget you'll be cutting off the flange part too. you'll have to re-weld the flange part on or your hose will slip off... which is a pain in the ass...

another something i noticed: the lower pipe on my 210 comes out and goes around the back of the alternator to underneath it before it faces forward. so yea a bit longer than your 2" for some reason.

Edited by Silent Shadow

ah ok, well my origional radiator isnt like that at all.

its just a "stumpy" ahah.

Few of dads mates are top clas welders so i might get them to run a bead around the tube as a flange.

if thats the way i decide to go.

ive found another one, which is a flat top, for the same price, i emailed them about demenions and they havnt got back to me.

i emailed ARE cooling, got a quote for $1170 for a custom made one.

i might the hose from the motor not from the radiator. mine is a little stumpy too.

well if you can get a flat-top one at the same price and you're happy with it then do that. why pay the extra 800-odd dollars for a custom?? jeesus..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...