Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Tried Clarke rubber and Kanga rubber to see if they have similar profile? They come to mind as suppliers worth asking.

I'm keen on replacing mine too, but I'd just want a new rubber not the whole thing.

Pretty keen on the rubber pending price. I was in the process of painting and restoring a spare cowl for just this purpose, but so far have been unable to find a replacement rubber strip.

Im still working on it, its a bit of a slow process...

I gave them a sample, cut of from my own rubber strip, which the supplier apparantly 'misplaced' so I gave them another and the supplier is sending back their closest match (all done via snail mail) should be a couple of days and they will give me a call and I'll go out and pick up the sample to see how it fits and gets some photos, measurements, comparisons etc... and pricing of course...

  • 1 month later...

nope Ive had no luck in finding a replacement rubber strip, only the OEM replacement cowling @ $220 each...

so I remove the deteriorated rubber strip, sanded and sprayed the cowling plastic & the wiper arms in satin black, looks good...

nope Ive had no luck in finding a replacement rubber strip, only the OEM replacement cowling @ $220 each...

so I remove the deteriorated rubber strip, sanded and sprayed the cowling plastic & the wiper arms in satin black, looks good...

Got any pics? :) If it look's good I might just do that.

Got any pics? :) If it look's good I might just do that.

it does look good... I fully recommend everyone to do it...

I'll see what I can do about pics, but pretty much they are going to show a nicely satin black coated version of what you have...lol...

just make sure you prep them well before painting....

Correct . I will try over weekend to post a pic haven't done so before.

Hey mate sorry can't get pic upload having sync problems. But it pretty straight forward I did my brothers today all you do is remove the factory silicon/selant with thin flat head, wipe clean, squeeze black silicon into the channel of the strip that sits under cowl just don't o.d. it, push seal into place,wipe excess with wet finger or rag take your pick, place a weight on seal and allow to dry..... Voila.

are you saying you stuck the rubber strip down with silicon?

pics?

 animan, on 08 July 2011 - 04:05 PM, said:

Correct . I will try over weekend to post a pic haven't done so before.

Hey mate sorry can't get pic upload having sync problems. But it pretty straight forward I did my brothers today all you do is remove the factory silicon/selant with thin flat head, wipe clean, squeeze black silicon into the channel of the strip that sits under cowl just don't o.d. it, push seal into place,wipe excess with wet finger or rag take your pick, place a weight on seal and allow to dry..... Voila.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...