Jump to content
SAU Community

Brand New Cowling With Rubber Strip

75coupe

By 75coupe,
in Exterior & Interior Styling

 Share

Recommended Posts

  • 2 weeks later...
Kinks Grand Master

Kinks

Posted
Posted

Tried Clarke rubber and Kanga rubber to see if they have similar profile? They come to mind as suppliers worth asking.

I'm keen on replacing mine too, but I'd just want a new rubber not the whole thing.

RANDY Veteran

RANDY

Posted
Posted

Pretty keen on the rubber pending price. I was in the process of painting and restoring a spare cowl for just this purpose, but so far have been unable to find a replacement rubber strip.

75coupe Grand Master

75coupe

Posted
  • Author
Posted

Im still working on it, its a bit of a slow process...

I gave them a sample, cut of from my own rubber strip, which the supplier apparantly 'misplaced' so I gave them another and the supplier is sending back their closest match (all done via snail mail) should be a couple of days and they will give me a call and I'll go out and pick up the sample to see how it fits and gets some photos, measurements, comparisons etc... and pricing of course...

  • 1 month later...
75coupe Grand Master

75coupe

Posted
  • Author
Posted

nope Ive had no luck in finding a replacement rubber strip, only the OEM replacement cowling @ $220 each...

so I remove the deteriorated rubber strip, sanded and sprayed the cowling plastic & the wiper arms in satin black, looks good...

Dani Boi Grand Master

Dani Boi

Posted
Posted

nope Ive had no luck in finding a replacement rubber strip, only the OEM replacement cowling @ $220 each...

so I remove the deteriorated rubber strip, sanded and sprayed the cowling plastic & the wiper arms in satin black, looks good...

Got any pics? :) If it look's good I might just do that.

75coupe Grand Master

75coupe

Posted
  • Author
Posted

Got any pics? :) If it look's good I might just do that.

it does look good... I fully recommend everyone to do it...

I'll see what I can do about pics, but pretty much they are going to show a nicely satin black coated version of what you have...lol...

just make sure you prep them well before painting....

animan Enthusiast

animan

Posted
Posted

Correct . I will try over weekend to post a pic haven't done so before.

Hey mate sorry can't get pic upload having sync problems. But it pretty straight forward I did my brothers today all you do is remove the factory silicon/selant with thin flat head, wipe clean, squeeze black silicon into the channel of the strip that sits under cowl just don't o.d. it, push seal into place,wipe excess with wet finger or rag take your pick, place a weight on seal and allow to dry..... Voila.

animan Enthusiast

animan

Posted
Posted

are you saying you stuck the rubber strip down with silicon?

pics?

 animan, on 08 July 2011 - 04:05 PM, said:

Correct . I will try over weekend to post a pic haven't done so before.

Hey mate sorry can't get pic upload having sync problems. But it pretty straight forward I did my brothers today all you do is remove the factory silicon/selant with thin flat head, wipe clean, squeeze black silicon into the channel of the strip that sits under cowl just don't o.d. it, push seal into place,wipe excess with wet finger or rag take your pick, place a weight on seal and allow to dry..... Voila.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Songo
      New kid on the block

      By Songo · Posted

      Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • MBS206
      New kid on the block

      By MBS206 · Posted

      https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Cangorus
      New here

      By Cangorus · Posted

      Hello everyone, I am happy to join you.
    • Duncan
      New here

      By Duncan · Posted

      Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...