Jump to content
SAU Community

Recommended Posts

I need some semi slicks in 255x35x18 size to fit my 9.5" rims.

I've got 18x9.5 rims currently with shitty street 255x35x18 tyres, 265's will fit the rear but the front will most likely hit on the upper suspension arm.

What are equivalent semi slicks to the Yokohama A048's that are available in 255/35/18, 245/35/18 or 245/40/18 ?

Thanks

Recovered after Andrew gave your ear the what-for? :D

What rims do you currently have offset wise, that's probably more the issue than tyres.

245 is a bit small for a GTR.

Still some ringing in the right ear :D

I'm looking from a dollar/performance ratio - 265x35x18 A048's delivered are ~$335 ea from www.tirerack.com, I can't justify an extra $200 per tyre to buy a newer model from elsewhere for probably less than a second per lap improvement. I'm running Hankook street tyres now so anything is an improvement.

Current rims have a poor offset - 18x9.5 @ +30mm so the track is too narrow. After some more thought, I think I should do the following:

Buy 9.5" track rims with around +18-22mm offset so the 265x35x18's fit,

Buy a set of R34 GTR rims for street use, since they're 18x9 @ +30mm,

Sell my existing wheels.

Another option for track use, are bolt on spacers safe if I use them on my existing rims?

Cheers

lol very good :D

Well my car was using bolt on spacers and did 2 years of solid track work before i purchased, and it was fine. No issues to speak of and you are talking PI/Sandown so high speed no problems.

I've since taken them off after putting 18's on. So based upon that i think it would be fine.

Or just get some cheap shitter track rims in the right offset. That could easily be done and probably the better overall otherwise you are going to be swapping tyres on rims rather than just rims! (or drive around semis constantly on-street)

RE: tyre choice - ye fair enough. I meant if you were going to spend that amount on those 'other' tyres, you'd be better off buying better ex-US kinda thing on a dollar per dollar basis.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Some times you just have to settle 
    • Good stuff, I suppose a measly 630rwkw should do for now.
    • It’s at 30psi, there’s still plenty left in it and Adam said it was making the power easily!! We ran out of injector though 
    • Car is now back - I have the Nismo fender extensions on it too. Body place did a really good job with melding them to fit the sedan.   I'd take a photo of the whole car, but it's somewhat hard to do from where it's parked in the carport. The OEM'ness is growing on me. As is the desire to buy wheels - But it would be flat out dumb to buy maybe fitting wheels with minimum precision and rush to fit them before going on a Tasmania road trip. Probably better to do that one with OEM spec wheels on it. I also bought a pod filter. It is not OEM spec.
    • The 32 still sits untouched with the broken gearbox. So a little off topic but not worth having a whole new thread. The daily starlet has gotten back on the road after 9 months. Suspected blown HeadGasket at a track day resulted in a bit of scope creep rebuild. The motor got a full tear down, pressure testing, machined for MLS HG, ARP head bolts, new bearings, all new seals etc also noticed some fatigue on the stock exhaust manifold so obviously the answer was a steam pipe manifold and highflow turbo. The exhaust was also looking tired with some rust holes. So I got a slightly over kill system made up consisting of Vibrant resonator and muffler with a highflow cat. The new highflow turbo had a larger inlet so instead of adapting the old intake got a case of the might as wells and had a nicer alloy intake made After the run in was finished i bought a (probably considered retro/vintage) EBC becasue "might as well"
×
×
  • Create New...