Jump to content
SAU Community

Recommended Posts

Clearing out the shed and selling my turbo to make way for something bigger and better.

Brakes, $500 for the lot; negotiable.

All were in good working order when removed, BMC has been kept wet since removal, rear calipers will be basically useless for everyone, but pads and rotors are always handy. Won't separate unless you can find someone else to buy what you don't want/need.

S14 4 pot front calipers w/ all hardware & hard lines

S14 1 pot rear calipers w/ all hardware

RDA S14 slotted front rotors

RDA S14 slotted rear rotors

Nissan rotors to suit R33 (plain)

S14 BM44 NON-ABS

1 set Acre Street Fighter pads (front)

1 set QFM A1RM pads (front)

1 set Genuine Nissan pads (front)

1 set Silverline pads (front, unused)

1 set Bendix StreetRoadTrack (rear)

1 set QFM A1RM (rear)

IMG_4315.jpg

IMG_4316.jpg

IMG_4317.jpg

(S14 front, requires machine, 29mm)

IMG_4318.jpg

(S14 rear, good to go, 9mm)

IMG_4325.jpg

(R33 front rotors, good to go, 29mm)

Tial MV-S 38mm external gate, with optional water cooling, brand new, only taken out of the box (which arrived today...) for photos. $400. Firm.

IMG_4306.jpg

IMG_4307.jpg

2860 Hi-flow, journal bearing, .64 rear, with HKS Hard intake, Comp cover, inlet, and outlet all powder coated in textured black. enlarged waste gate port (currently at MTQ being done), less than 10,000k's since rebuild. Never run above 1 bar.

$800 with HKS intake pipe, $600 without.

IMG_4312.jpg

(Exhaust housing not pictured, will obviously be included).

IMG_4313.jpg

IMG_4314.jpg

Located in the Northern 'burbs.

Can be contacted on here or on 0408961657. SMS messages will likely be ignored.

Cheers!

Dave.

Turbo SOLD!

Price drops!

Brakes now $450 neg for the lot!

Tial Gate is now $375! BRAND f**kING NEW!

HKS Intake kit still available, pics up soon, $200 ono!

Shit's awesome. Tell your friends!

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...