Jump to content
SAU Community

Recommended Posts

  • Replies 273
  • Created
  • Last Reply

Top Posters In This Topic

Then she took a few photos of me rinsing the car off.

6391792665_b444cf3f56_b.jpg

While I'm obviously aware of the fact I don't weigh very much, due to the 'no food for a year' thing, this next photo surprised me a bit with quite how skinny I look. Considering I weigh about 10kg more than at the same time last year, I must have looked like a skeleton in hospital.

6391793789_b0be0abbc0_b.jpg

For a change of pace, later that week I made a random hills run down south, as I don't tend to go down that way very often.

I was thinking that it might be interesting and a bit of a challenge to shoot some photos on 35mm black and white film. While digital stuff is really good and more practical, you lose some of the mystery and guesswork by being able to see the photo straight away. And since you don't have a lot of photos to work with on a roll of film, I tend to be much more careful before hitting the shutter button. Instead of spraying 10 photos of something like I can do on digital, I really make sure the composition is exactly right before I take a photo, rather than several that are almost right.

Waiting another couple of weeks to see the photos is interesting in its own way as well. So along with my Nikon digital SLRs, I packed my old Canon EOS 33 with a 50mm f/1.8 lens, and picked up a couple of rolls of Kodak T-MAX 400 in Blackwood.

6391794881_db27808baa_b.jpg

So the next few posts will have a mix of the black and white film photos, as well as the colour images from my digital SLRs.

6391812537_8199c78eae_b.jpg

6391813909_30a807b4b3_b.jpg

  • 2 weeks later...

The next day I still had a hankering for more random hills and dirt road explorations, so I headed south, with no particular destination in mind.

Driving down Military Road, a bright red Ferrari F430 turned at a roundabout in front of me. The driver wasn't giving it much stick, but even at low revs it sounded pretty sweet.

6479446741_4446cef612_b.jpg

I grabbed a couple of shots as it pulled away from a set of traffic lights, next to an old Hyundai Excel. It's kind of funny seeing them side by side; both will get you from A to B, but in very different levels of speed and dollars.

6479447783_a4b89f1485_b.jpg

I then continued heading south down Tapleys Hill Road, and kept on it for quite some time, until reaching a turnoff for the Myponga reservoir. I remembered from a previous visit years ago that you can actually drive across the dam wall itself, which was kind of cool.

I pulled up to take a few photos of the car and rolling landscape.

6479451841_a6f1d8230f_b.jpg

6479450635_b147702ebd_b.jpg

A ute and trailer going past caught my eye, mostly because it was loaded with what looked like a Datsun 1600 rally car.

6479449193_ff288fb879_b.jpg

I then drove over the dam wall which had a nice view, but you're not allowed to stop on it, so I couldn't take any photos. There were plenty of nice dirt roads around, and I started to try and make my way down to one of the beaches.

Like in the previous post, I alternated using my Nikon digital SLR and Canon 35mm SLR with black and white film. After a few twists and turns, I found a picturesque dirt road winding its way through the slopes and down to the shore.

6479487313_30f4e5b227_b.jpg

6479460505_9c355ecbab_b.jpg

The road itself largely consisted of very fine bulldust on chunky gravel, which meant the dirt got everywhere.

6479464245_71976a3e53_b.jpg

6479461535_be20f84b74_b.jpg

6479462743_b83c32e9b7_b.jpg

I then made a somewhat poor choice in turning down a road that was signposted 'dry weather only'. It was ok at the start, but then degraded into a very steep and rocky track. You can't really tell in this photos quite how severe the grade is; but between that and the loose rocky surface, I had to idle down the slope at a snail's pace while standing on the brakes.

6479470141_537687abdc_b.jpg

6479472421_216b8ed586_b.jpg

6479473789_ef8ae6839c_b.jpg

6479475133_20807da830_b.jpg

6479496319_fd2b9e5de1_b.jpg

6479495045_b820697785_b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...