Jump to content
SAU Community

Recommended Posts

Garrett -7 turbos x2 low kms excellent condition come with acuators reday to bolt on

$1800

Sparco sprint V seats in black x2 as new condition with jdm rails suit R32,33,34 gtst and gtr will fit silvias and 180s also (will trade with s2 seats gtr seats or recaros and cash)

$1500 pair

Rb26 R33 gtr 444cc injectors under 20,000kms use

$250u

Rb26 RWD modifyed sump

$250

Trust copy Rb26 intake setup hot side piping silicone joiners pod filters and turbo ss intakes used

$200

Apexi power intake filters and afm adapters for Rb26

$250

Rb26 stock afm x2 32 gtr

$100

Rb26 stock cast exhaust manifolds x2

$100

Rb26 r32 gtr stock dump pipes x2

$50

Rb26 oil and water feeds for stock turbos

$100 for both setups

R33 gtr stock turbos rebuilt under 20k use on 12 psi x2

$500

Haltech e8 ecu and patch loom suit s14 etc

$1000

Hks series 1 cam gears x2 suit rb motors

$120 pair

Rb 26 r33 gtr stock valve springs and retainers under 20k use

$200

Rb26 r33 gtr stock intercooler good condition

$200

pm post or call 0422646961

post-81210-0-45102900-1304560179_thumb.jpg

post-81210-0-90607000-1304560021_thumb.jpg

post-81210-0-86797100-1304560090_thumb.jpg

post-81210-0-70762500-1304560453_thumb.jpg

post-81210-0-87031300-1304560603_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...