Jump to content
SAU Community

Recommended Posts

I’m upgrading the fuel pump in my R32 GTR and would like some feedback please on possible options (I’ve already searched and read SAU extensively and don’t think the popular Bosch 044 pump option is for me). I need something that:

is quiet

will support around 280 4wkw

is dedicated/designed as an in tank pump

uses the existing wiring safely ie doesn’t require extra electrical circuits

will drop-in without fitting other than straight r&r

Options so far appear to be:

1. R33 GTR. A source has indicated that the R33 GTR pump outflows the R32 GTR pump. This would be ideal if it’s true (I’m sceptical) and it’s a drop in fit. Can anyone shed light on this and if it is true, what is the GTR pump flow rate?

2. Nismo. Drop in fit, pricey but good.

3. Apexi. Drop in fit, discontinued but good.

4. Sard. Drop in fit, popular.

Would appreciate feedback from anyone who has first hand experience.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/36454-gtr-fuel-pump-upgrade/
Share on other sites

I think you'll find when you upgrade pumps that you'll need to upgrade your wiring to the pump. Larger pumps draw more current and stock GTR wiring is often not up to the task.

I recently had a Bosch 927 (correct me if I'm wrong Dean) fitted and needed to have new wiring installed. Wasn't a big deal and cost an extra $150. We tried an 044, but it didn't fit, so we went for his baby brother. I'm running ~320rwkw, so I think it matches your needs.

Hi NRB;

I'm convinced this is a good idea.  Could I please ask how (assuming your car is an R32?) you routed the live feed, particularly the point from which the feed was taken ie battery or another point?

Thanks

Your assumption is correct. The feed was taken from the battery, and has an inline fuse. The wire (quite a thick one, dunno the gauge) runs direct to the fuel pump. I didn't install it myself, it was done by the auto electrician over the road from RacePace in Bayswater.

Nick

Sidewaymambo;

Thanks for the lead (no pun intended). It's not the physical fit that is the problem as there are a number of pumps that are 'drop in'. The issue is the ability of the standard wiring to cope with increased current loads generated by a pump that will support 300kw at the wheels.

I'm not sure what max current the standard pump draws, but it's probably a reasonable bet that any upgrade will have an increased load. The Bosch 975 draws about 10.5 amps (probably about the same as most of the aftermarket 'drop in' pumps)whereas the 044 draws about 15, which is a significant increase. The thicker wiring is just insurance for any level of upgrade.

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...