Jump to content
SAU Community

Recommended Posts

hey guys, well time for a change so the car that has done me well for the past 3ish years is time to go. Been a great car, never had any problems with it.

2003

White

196,***kms

tow bar

tinted windows

aftermarket exhaust

17" Drift R's

previous owner put a pod filter on it too

Standard otherwise.

Bad:

Brake discs need machining, bit of vibrations under brakes, which i was going to get done on next service.

Rear tyres could use replacing

Headlight out and taillight out which i will try and get around to replacing before sale

Usual couple of small shopping trolley dents

Thats about it, reason for sale is i want to get a 4x4 for some off road fun so i will consider swaps for a suitable 4x4, otherwise looking for $9,900.

Pics show car with old wheels which were sold last year.

Cheers.

Will come with 3 months rego too.

Image037.jpg

Image035.jpg

Link to comment
https://www.sau.com.au/forums/topic/364637-sa-2003-ba-xt-falcon/
Share on other sites

well took it today for a professional clean inside and out and she came up a treat, so car now comes nice and sparkly clean if purchased soon. Here is a couple of pics i just took.

IMG_6353.jpg

IMG_6354.jpg

IMG_6355.jpg

IMG_6356.jpg

IMG_6357.jpg

IMG_6358.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...