Jump to content
SAU Community

Recommended Posts

Hi guys. I have a 2004 350GT Premium. I'm not too happy with the BOSE sound system so I decided that I'm gonna change the setup.

-New Head unit.

-New Speakers

-Amp

-Subwoofer

I've had a look around the forum but I can't really find anyone who has done a complete audio revamp of their V.

Can anyone recommend someone or a place in Sydney that will be able to do the job?

Is it better to replace the control panel to accommodate the head unit? or should I just

place it inside the glove box?

any suggestions would be great.

Link to comment
https://www.sau.com.au/forums/topic/365036-not-satisfied-with-the-bose/
Share on other sites

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Edited by mosoto

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

very nice.. though i wont think i'll be spending that much.. i'll be spending more on the range of $1.5K-2K

just started shopping around ebay for the dash conversion. strathfield car radios is selling the dash conversion for $500 :|

massive rip off.

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

Thanks Tarun. The system is as follows:

Speakers - Hybrid Audio Technology or HAT. 7.1" midbass, 3" midrange and 1" tweeter.

Amps - Zed audio Leviathan 6x150w one for left side one for right.

Head Unit is the Pioneer P99.

Subs are Image Dynamics IDQ12's

All speaker cabling is Canare.

Signal cable is 8 channel Mogami snake cable w/- stinger bullit ends.

I've got a 160GB hardrive in the centre console connected to the HU via USB so I rarely use the CD.

A link to my build thread on MEA is here. Sorry, it's a members only section so the link will be no good unless you join MEA. :) but well worth it if you are into car audio

Edited by mosoto

Mark i would sugest checking out ebay and getting a din replacement from ebays, you can get em for like 100 bucks for just the face, also i have a non prem v 2003 are the speakers in front and rear the same size? im thinking i might get some pioneers installerd.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • There's one for sale at Grand Auto Wreckers in Lonsdale (SA), for .... let's suggest the sum they're asking for will make you cry. You may have to embrace the idea of modifying the rear subframe to accept some other diff. You could probably find a way to wangle a shortnose into there, with a custom rear adapter and some sort of shenanigans to relocate the front mounts. This has probably already been done by others, so there might be some guidance available as to how easy/impossible it is, out there in the googles. But you possibly needn't restrict yourself to Nissan diffs if you're going to contemplate that. There are similarish Toyota diffs, possibly some Euro ones, possibly some Seppo ones.
    • The ball joint taper and arm taper have to match angle and diameter, but just doing the bushes is a much better option.....seems like the industry moved to "it is cheaper to replace the whole arm than take on the labour for changing this bushes", glad the aftermarket supports it
    • Gee she looks a bit rear heavy in that first pic! Sounds like a great project with the kids, but as I guess you know R series stuff is getting hard to find and pre that is pretty much impossible these days
    • Thanks GTSboy. I will inspect the valves actually, is this something I can do while they are still in the head? The block/bores don’t look bad to be honest hey, I can still see the cross hatches in the bores and they still measure 86.5mm. I’m not sure how to measure the installed ring gaps but I will do that and take it to someone who can. 
    • I’ve had the same headache with my lowered car, scissor jack first then floor jack every time. Ended up grabbing an extra-low profile aluminum jack (about 70mm entry height) and it finally slides under the lip without drama.
×
×
  • Create New...