Jump to content
SAU Community

Recommended Posts

Item Summary: 1988 NISSAN CEFIRO a31,

Location: QLD: Gold Coast

Asking Price: $14,000

Condition: Used

Reason for Selling: want something more sensible

Delivery Methods: PickUp

Contact Info: 0403557352

Extra Information:

I've decided to get rid of my Cefiro.

I am the first and only owner in Australia (have all import papers still) and have owned it for about 5 years now.

Reason for selling/swapping is I've started going to uni and need something more practical for the next few years.

$14,000 or swaps for a Manual, IS200 with the luxury interior or 3rd Gen Honda Odyssey

(or some similar jap/euro styled car)

Please no commodores etc, I don't care how hektic the sound system is or how good it bakes that one tyre.

Specs are bellow.

1988 Nissan Cefiro

Engine/Drivetrain:

S13 Blacktop SR20DET conversion (has done under 3000k's since rebuild)

20 though oversized Wiseco Forged Pistons

Eagle H-Beam Rods

Fully rebuilt head

Cosworth Metal Head Gasket

Rocker Arm Stoppers

8 Brand new Rocker Arms (genuine nissan)

Tomei Poncams 256/256 11.5mm lift

Denso 550cc injectors

HKS GT2530 (Purchased new)

Nismo Engine Mounts

SR20DET 5-Speed Box (Freshly Re-Co'd)

Apexi Power FC D-Jetro

Custom 3" metal intake

Greddy Dump Pipe

Modified Midmount Hybrid intercooler

Custom intercooler piping

Mechanical 2way LSD

HKS Remote Mount Oil Cooler with Trust Core

Alloy Radiator

Extra Capacity Sump

Exedy 5 Puck Brass Button (5000km old)

Custom 3" Dump Back Exhaust (tucked up nice and high)

High flow 3" cat

Bosch 023 Fuel pump

All heater hoses etc were replaced when rebuilt (or removed if unnecessary)

Suspension & Bracing:

Racing Logic Coilovers 9F/8R

Ikeya Formula Tie Rods

Ikeya Formula Lock Spacers

KTS Adjustable Toe Arms

KTS Adjustable Castor Arms

R32 GTR rear sway bar

Unknown Jap Adjustable Camber Arms (gold colouring makes me suspect ikeya formula)

Full 5 Stud Conversion

R32 Skyline Front Brake Upgrade

Solid Cradle Spacers

All traces of HICAS removed.

Cusco Front Strut Brace

KTS Rear Strut Brace

Aesthetics:

Late model interior (suede instead of carpet stuff)

Late model Tail Lights

Late model non projector headlights

VIP Tint all round

New weather shields

Recaro Reclinable Drivers side Bucket seat

HKS boost gauge

Nismo Shift knob

Pivot fan controller (used to read water and oil temps)

Autech Edition Bodykit

White Work Emotion CRKai's 17x9 front

White Work Emotion CRKai's 18x9.5 rear

Engine is making 200rwkw at 16psi

I had this engine built with maximum torque and response in mind.

Full boost by 3000rpm and pulls until limiter

I wanted to have it tuned for 22psi+ but the HKS wastegate would only support 16psi safely

should crack 220+kw with a decent EBC

w0pegi.jpg

IMG_1012.jpg

IMG_1014.jpg

IMG_1015.jpg

IMG_1017.jpg

IMG_1018.jpg

Link to comment
https://www.sau.com.au/forums/topic/365051-a31-cefiro/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...