Jump to content
SAU Community

Event Day - Hillarys Boat Harbour To Fremantle On The 31St July 2011


Recommended Posts

Hey Guys we've organised a Day Event from Hillarys Boat Harbour to Freo here is the link on facebook: www.facebook.com/event.php?eid=227770757239289

If you want some professional quality photos of your car , WHBphotography has offered to take 5 photos for $5!! Heres a link to our page www.facebook.com/WHBphotography

Thanks alot guys and hope to your Skyline there!

If you guys have any questions please call Will on 0415 513 196, or Michael on 0430 745 641 or contact WHBphotography on facebook.

Cheers

  • 2 weeks later...

Hey guys make sure to invite all your friends on Facebok to the event;

http://www.facebook....227770757239289

post-85392-0-50609700-1307452793_thumb.jpgpost-85392-0-62184200-1307452839_thumb.jpgpost-85392-0-91682500-1307452870_thumb.jpg

cheers

Great photos!

I will probably miss out on this event with work. Also, I can't seem to find the Facebook page.

Hey guys,

As Eric posted, the event is on Sunday the 31st of July 1.00pm to 4.00pm. The time is just an estimate, so it may run later that 4.pm. It would be sweet if we could get some sunset shots in.

Cheers for the enthusiasm guys!

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...