Jump to content
SAU Community

Recommended Posts

Hey guys, gonna join sauwa and just I bought the GTR in this thread,

http://www.skylinesaustralia.com/forums/topic/344568-r32-gtr-v-spec-ii/

I went through the regs in the sticky and not sure I can make heads from tails, what I want to know is if anyone thinks i'll have trouble getting the car over the pits, the exhaust isn't loud but my main concern is with the cams and coilovers, it looks stock in the engine (you can see from the pics) and has a high enough ride height. No EBC or ECU visible.

If I will have too much trouble with it I can take it to QLD and get it registered before bringing it over here. Any help would be greatly appreciated as I haven't had to take a car over the pits before.

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/
Share on other sites

i was in the same boat as you. i brought my GTR over from Sydney and took it over Warwick pits 2 weeks ago - i recommend taking it there!

mines got cams and also fully adjustable ohlins coil-overs, idle is fairly lumpy and the coil-overs are @ above legal height, this didn't concern them at all. mine's setup for 500hp+ but the engine bay looks fairly stock like yours which is a plus, just clean everything make sure theres no oil or coolant leaks, degrease the engine bay and under the car, make sure EVERYTHING works electrically.

also while your there get them to give u permits, i just did the bits you can see like exhaust, my massive FMIC and the adjustable fuel pressure reg, hide any boost controllers and boost gauges.

any questions just pm me :)

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/#findComment-5843252
Share on other sites

Take it over.

Pass = banana.gif

Fail = Get list of what needs to be "Fixed".

= Pass = banana.gif

This.

Generally the pits are pretty good. Cops might sting you because most don't know what they are looking for, but pit inspectors are reasonable.

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/#findComment-5843524
Share on other sites

Cops might sting you because most don't know what they are looking for, but pit inspectors are reasonable.

From the photos it looks immaculate both inside and out. Eveything looks neat and well done. Cops shouldn't give you a hard time, unless you really ask for it.

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/#findComment-5843541
Share on other sites

From the photos it looks immaculate both inside and out. Eveything looks neat and well done. Cops shouldn't give you a hard time, unless you really ask for it.

Yeh, I agree. Hadn't looked at the photos yet when I commented.

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/#findComment-5843929
Share on other sites

I've always found the inspectors at the pits to be reasonable guys.

Spending their days inspecting 100 year old stuffed Taragos and the like they are usually impressed to see a well presented and obviously loved vehicle.

They'll want you to pass unless their hands are tied (like it's draggin it's arse)

So don't worry, present it as it is and fix any items on the list if it fails.

PS Midland are good guys too

Link to comment
https://www.sau.com.au/forums/topic/366276-new-gtr-owner/#findComment-5844207
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...