Jump to content
SAU Community

Recommended Posts

Injectors

550cc Top feed

denzo injecotrs i had them cleaned ( cost me 125 )

had new orings put on aswell

will fit 11mm and 14mm ( plugs included )

330 Firm

Avo Intercooler ( good quality )

Bloack in color Return style.

couple of bent fins but not twisted or anything

i bought for 830 and made 306 rwkw with it

Comes with all piping needed

looking for 250 FIRM

SPACERS...........

4x114.3

20mm $80

30mm $75 does not come with nuts ( but i know where to get them )

5x114.3

25mm $75 does not come with nuts ( but i know where to get them )

im tracking down nuts for them now

Wrecking R33 Skyline PARTs

Rear Calipers $80 Firm

Steering Rack $40

Stock Turbo

minimal shaft play

no actuator $250 Firm

Rb25det done 120xxx

And has had

NO modifications

( not even pod filter ) $1680

Rb25det Auto gearbox

Drove fine $250

R33 Tail lights

(tiny chip where indicator is) $70 PAIR comes with center garish

White Rear bar ( STD )

ill throw reo bar in $70

R33 white s2 Wing+boot $50 FOR BOTH!!

R33 Front Fenders $65 for left

Left one has a small paint $75 for right

chip where headlight is $120 for both

drivers side door skine

( GOOD NICK s2) $40

boot carpet $20

Rear seats $50

Oem Clutch ( looks like there

is alot left ) $80

Turbo Smart Bov Adapter (alloy) $18

s1 Centre Grill $18

S14 S2 PARTS

Hand Brake Set up

Lever plus cables $90

Brake booster and master

cylinder $90

Right hand door excluding

switch has some paint fade $90

Drivers door switch $35

Sunroof i have

comes with

glass + motor + lineing

$40 Stupid low just want it gone

S2 boot + wing

paint has faded $45

Stock bov and pipe that

runs over engine $50

Auto Diff ( will fit man )

only done 130xxx minimel play $110

glove box ( good nick ) $30

Good nick Stock AFM $50

Ignition pack $40

Washer bottle ( no cracks ) $30

Mirrors Left And Right

tiny bit of paint fade

Black base red mirror $45 per side

S14 FULL rad support $60 CHEAP!!!!!!!

s13/180sx

Drivers Seat in ok condition(sr)$25

Stock Rear bar (black) $25

Stock ca front bar( Grey ) $25

Thats all i can think of right now

i have alot of photos so if you want to ask any questions or see anything just ask

[email protected]

0430106414

located in s.e suburbs Melb

willing to do swaps for r32 Gtr passenger / rear seats

Link to comment
https://www.sau.com.au/forums/topic/366325-after-market-stock-heaps-here/
Share on other sites

20mm 4 stud are gone but if your are talking about the 5 stud. the studs on your car wil poke a tiny bit

and yes i will courier if you organise it :)

if you still want pics throw me a sms

0430106414

can you send me pics of the AVO intercooler ? what was it fitted too ? curious on what brackets you have. either email or sms [email protected] or 0417506282

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...