Jump to content
SAU Community

Recommended Posts

All parts located in Vic, CBD area - pickup preferred, will post some items at buyers expense.

Email [email protected]

Pics to come.

ATP 'frank' turbo, stainless manifold, t3 flange, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Roughly equivalent size to GT30r. Braided lines included. $1300ono

Stack 8130 dash with sensors for oil temp, oil pressure, water temp, $1800 firm > cost over $2200 from vsport australia, excellent condition.

V8 supercar GT wing, 1.6m wide x 12" chord length, comes with mounts and allows adjustable angle of attack up to 20 degrees, painted black, red NISSAN sticker, excellent condition, $1000 for the lot. Will also include black R34 boot lid with pre-mounted reinforced crush tubes to mount the wing for free (will fit R34 GTR or R34 GT-T)

Racepace 3.5" rear muffler, super high flow but quiet $500

will throw in 3.5" cat-back mild steel piping to suit R34 if buyer wants it, i think the muffler can be used on r33 skyline too

used momo steering wheel, center horn button has been shaved around edges but will sit fine bolted to a boss kit, only have 5 out of 6 allen bolts (lost one) $100

used trust shift knob suit r34 skyline, 10mm thread (M10 x 1.25), will also fit s14 200sx, should suit other skylines, very good condition $40

used genuine nismo 1.3 bar radiator cap $20

2 x used genuine hks ssqv blow off valve flange adapters to suit skylines $20 each

r34 gtt triple guages, no housing $40

pair of s15 dmax vented front fenders +30mm brand new $280

Sorry for the delay.. PICS

also added s14 ganador mirrors, electric mirror control via factory loom, blue lens, very good condition. $330

post-10650-0-70869300-1307160366_thumb.jpg

post-10650-0-53106700-1307160375_thumb.jpg

post-10650-0-15306000-1307160386_thumb.jpg

post-10650-0-30205700-1307160398_thumb.jpg

post-10650-0-30938400-1307160408_thumb.jpg

post-10650-0-12424500-1307160418_thumb.jpg

post-10650-0-24915000-1307160429_thumb.jpg

post-10650-0-09945600-1307160439_thumb.jpg

post-10650-0-06657400-1307160453_thumb.jpg

post-10650-0-08632800-1307160463_thumb.jpg

post-10650-0-08018800-1307160484_thumb.jpg

post-10650-0-97890900-1307160498_thumb.jpg

post-10650-0-32930300-1307160511_thumb.jpg

post-10650-0-57088000-1307160523_thumb.jpg

post-10650-0-35123400-1307160537_thumb.jpg

post-10650-0-55676300-1307160740_thumb.jpg

post-10650-0-16450900-1307160753_thumb.jpg

correction the turbo is T2 flange

bit smaller than a gt30... i don't really know the specs it was on my car when i bought it. the induction pipe is included.

post-10650-0-87703500-1307162078_thumb.jpg

post-10650-0-65264000-1307162091_thumb.jpg

post-10650-0-81396600-1307162470_thumb.jpg

oh well, yeah i've had a fair bit of interest in the wing, but mostly interstate! even had a dude in Canada who wanted a shipping quote lol... Not really keen to send it interstate let alone overseas! I'm in no rush either way.

oh well, yeah i've had a fair bit of interest in the wing, but mostly interstate! even had a dude in Canada who wanted a shipping quote lol... Not really keen to send it interstate let alone overseas! I'm in no rush either way.

V8 wing in canada. That would be cool.

What model V8 supercar is it off? VY/VZ?

  • 2 weeks later...

Hey mate spoke to the other day on the phone when you where at re autoworks havnt heard back still waiting to here from you about picking it up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...