Jump to content
SAU Community

Recommended Posts

nah.. Missus didnt wanna go for the drive, just had too much on.. Was wanting one of the first 1000 bottles too..

damn bundy store won't ship any less than 12 bottles LOL

Edited by .:: GimpS-R34 ::.
Link to comment
https://www.sau.com.au/forums/topic/366812-bundaberg/#findComment-5851767
Share on other sites

you are correct about the car scene dying. It may have something to do with the plethora of comonwhore and flaggon owning deuschebags partaking in random acts of stupidity and drawing the attention of the rozzers to a particular group. Up here in Gladstone its like you have to serve a jail sentence everytime you want to go for a cruise. We were going to rockhampton alot last year but they have really cracked down up there too. I occasionally head up to yepoon and cruise the roads with davo in his v8 ovlov but these days work takes up most of my time. It would be great to have a decent cruise (a sensible one, minus duckheads) occasionally, go to a coffee shop or something every now and then. Oh, and chocco, hoping to have the datsun back in 2 weeks. Then i have the lovely task of tearing the motor outta my mates crashed gtr so i can build a forged donk for the purple car. Money money :(

Link to comment
https://www.sau.com.au/forums/topic/366812-bundaberg/#findComment-5854111
Share on other sites

Yeah iv noticed theres alot of idiot drivers here, mainly why i cant be bothered going out as i dont want to be associated with them, their cars are usually utter crap! then theres the P platers racing about with new commonwhores (how do they afford these?) which i cant stand the site of anymore! im going to be a miserable b*stard when im old!:pirate:

Link to comment
https://www.sau.com.au/forums/topic/366812-bundaberg/#findComment-5859748
Share on other sites

to afford the new commondores and flaggons ford and holden have introduced new boundries for thier lending and finance criteria. Must be over 18 and breathing to get finance.

On a side note, great weather for this years hookup.....same as last year, raining, freezing and bogans EVERYWHERE

Link to comment
https://www.sau.com.au/forums/topic/366812-bundaberg/#findComment-5860701
Share on other sites

lol, yeah and an IQ of anything less than 10.

well after witnessing my skyline buddy having contact with a roo (at quite a fast pace) last night, i wont be racing on public roads, especially not without bull bars on the car! lol.

he was alright thankfully, after almost going off the road. its a r33 so easy for parts :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/366812-bundaberg/#findComment-5860928
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...