Jump to content
SAU Community

Recommended Posts

Hey guys. Just picked my skyline up today, getting to know all the new buttons and whatnot. I noticed a little electrical screen with some functions to the left of the steering wheel. Is this a turbo timer or something? I have no idea what it is or how to use it. I tried looking in the owners manual and couldn't find anything. I will upload a picture of it tomorrow. I have a 1999 r34 gt-t. Any help is appreciated. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/367055-turbo-timer-help-please/
Share on other sites

take a pic of it (as you said you are going to) and post it up so we can see what model it is and someone on here might have the same one and give you an idea of how to work it.

general run down on how they work though, they allow the engine to keep running for a certain amount of time after you turn the key off (meaning you have to leave the car in neutral with the handbrake on in the case of a manual). this allows the engine to keep circulating the oil and coolant to cool the turbo down. this is mainly for if you have been giving it the beans just before pulling up, however the better option is to not fang it right before you are going to stop and just take it easy for the last km or so before you get to your destination (if you have fanged it at all).

It is a turbo timer, when I put it on, my car idled for about 2 minutes before turning off. Question now is, how do I use it. I have messed around with it a bit, and have NO IDEA how to use it.

http://imageshack.us/photo/my-images/830/img0211zp.jpg/ http://imageshack.us/photo/my-images/689/img0212fb.jpg/

Extremely stupid and hard to use (which is weird for anything Japanese?) but I managed to find a manual and automatic control. I just leave it in automatic and it averages about 1 minute after nannying it, and up to 3 1/2 minutes after heavyish driving, which seems to be ok.

In manual, you have to hold the "set" button and hit the "m.s.d" button to up the seconds or the "m.h" for minutes (up to 9:55). When I hit the "test" button, the timer turns off, then on again in about 2 seconds (useless?). I am guessing both the "standby" buttons are preset idle times, but I can't be bothered working it out.

In conclusioin? It works fine if I put it on auto, and I don't have to worry about it. :)

i feel so super cool when i park my car and lock it and someone says your car is still on .. im like i know :nyaanyaa:

Yeah, makes me feel like a pirate, only without the pludering.

Or a polar bear without the weird looking horns that scare insane looking shoes off of emos.

No, they were designed for exterme heavy driving right up until you pull into the driveway. If you are grannying it (nothing over 3k revs) then there is no need to have a turbo timer as the turbo would already be cool. As someone meantioned, if you drive like a woman for 2-3 minutes before your destination, there wouldn't be any need to put your turbo timer on.

exactly. and this is actually the best way to do it (granny it for the last few mins before you arrive at your destination) as this will let your brakes get decent airflow to cool down, as well as better airflow through the radiator.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...