Jump to content
SAU Community

Recommended Posts

The matte black color is custom color and is exclusive to our OTR vendor.

Reason for sale is that I am planning to change to VR G2 19"

Genuine Rays center cap included.

18 x 9.5 +25 (I think, have to double check) all round

264845_2022141240800_1462028710_2230873_7997619_n.jpg

247994_2003262968855_1462028710_2208279_5651300_n.jpg

44748_1538094739940_1462028710_1394168_6058740_n.jpg

Really minor to none scraches on it (i think one really really small ones, but easy fix because it is matte black)

Comes with Yokohama Advan tyres 245 40 18 i think (for the front, about 50% left)

and KU36 275 35 18 I think for the rear about 50% left.

Costed about 2700 I cant remember for just the wheels and the center caps (caps are always additional cost).

Asking for about 2000 with the tyres on.

----------------------------------------------------------------------------------------------------

As pictured. Fits 370z, R32, R33, R34, S14, S15

Brand new in packaging and box

Good price $120 all yours willing to post.

Was gonna go onto my car but I just purchased a set of HC+

247239_2017208077474_1462028710_2226815_534460_n.jpg

248341_2017212957596_1462028710_2226818_2805728_n.jpg

------------------------------------------------------

3 Months old JDM spacer adapter by KICS. 5x114.3 25mm

Great quality and condition!

253444_2014533770618_1462028710_2224089_4396720_n.jpg

$120

-----------------------------------------------------------------------------------------------------

Project KICS JDM spacer universal fit 4-5 studs, 100-120 PCD

255001_2014532050575_1462028710_2224087_4974233_n.jpg

$30

PLEASE ONLY CONTACT ME VIA SMS

0422358259

Edited by jona1986

The offsets is right. And yes it wasn't ideal for a 370z as I needed spacers at the back to have them sit flush. But they should be good for EVOs, STIs, GTRs. not sure about the offset of skylines tho. But they are 18x9.5 +22 for sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...