Jump to content
SAU Community

Recommended Posts

Very very very regretful but urgent sale.

Your chance to own a very clean and basically stock example of the legendary "Godzilla".

Recent compression test came back perfect with 155-160 psi in all 6 cyl.

Just serviced with only quality products. Car runs like brand new and will not disappoint.

137,000 kms

Apexi 3.5" exhaustt

Nismo 320km/h dash

Nismo gear knob (original also included)

Nismo clear side indicators (originals also included)

Carbon rear wing (original also included)

Alarm with built in turbo timer

R34 wheels

$2,500 stereo

6 months rego

Also included but not fitted:

N1 steel wheel turbo rebuild kit x 2

N1 oil pump

N1 water pump

Note:

Slight paint fading on a section of the roof (quoted $400 to respray)

Drivers window has common problem where it needs to be 'helped' up and down (approx $200 for replacement power window motor)

Any mechanical inspection or test welcome. Only selling due to the purchase of a business and I am leaving the country for a month so the extra cash would be nice. I fly out on the 15th of July which is fast approaching so must sell fast! I have not owned this car very long and I am losing bulk money on it. Im sure first to see will buy.

Please call, sms or email anytime

NOW $17,000 BARGAIN!!!

Reece

0420 370 659

[email protected]

PS: I am willing to send interstate for only $500

2011-06-11135633.jpg

2011-06-11135732.jpg

2011-06-11135654.jpg

2011-06-11135706.jpg

2011-06-11135717.jpg

2011-06-11135756.jpg

2011-06-11135953.jpg

2011-06-11135848.jpg

2011-06-11135900.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...