Jump to content
SAU Community

Mdex3, Microphone, Stroblight, Headphones

Lucaas

By Lucaas,
in For Sale (Other Items)

 Share

Recommended Posts

Lucaas Collaborator

Lucaas

Posted
Posted (edited)

Hey guys,

had my dj set up for sale for a while now, kinda wanna get rid of it. the whole set includes:

- Audioline MDEX3

- TDK Noise Canceling Headphones ( NC-150 )

- UniDirectional Dynamic Microphone

- 24watt Strobe Light ( 12.5x12.5cm )

well i wont split this bundle up as i want the set to go to a good home, all items are in near new condition, i found some details on the mdex3 off the net so ive copy and pasted below

~

Overview

The MDEX3 is our latest incarnation of the ultimate all in one DJ Mixer With its ability to read music stored on USB and SD cards, Portable hard drives and optical CD,s (R and RW Types).

Key Features

The new larger Jog wheel allows users not only to search and pitch bend but now even scratch and break just as if it were a vinyl turntable.

From Cue to Start, get into the mix with no delay. The new DEX3 starts in a matter of Milliseconds making it easier to synchro start to a quick cross fade.

The brightly illuminated Blue backlit LCD main window displays a mired of info including essentials like artist, track title, pitch adjustment, time elapsed/remaining, track length and BPM

Like all Audioline products, its quick and easy connect it to almost any amplification source including your home stereo.

~

Headphones and MDEX3 come in original box's

im at kingsgrove area, Sydney.

$300 Firm!!. ( Whole thing owes me around $500+ ).

would like Pick up although can post at buyers expense ( paypal only )

Pictures: http://www.ebay.com....=item2a10d020f0

Edited by Lucaas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...