Jump to content
SAU Community

Recommended Posts

Hey all

After much thought, I have decided to sell up my toys. As alot of you on here know i allways look after my cars and allways buy and use only the best! Still not 100% sure i want to part with my GTRs but cant have everything.

Car only had a few minor mods done when i purchased it a while back, mods / parts listed below have been added / installed while i have owned it. Car has done 128 XXX KM of which 125 XXX KM of these car was in completly standard form, running stock boost.

I also have FULL ( yes FULL ) history of this GTR from the day it was purchased, stamped NISSAN dealer hand books Nissan service reports, ECT till now ( its a big folder and rare to have these days )

For those who have or have not delt with me befor, I am very particular in how i do things and want things done, I allways buy top quality parts and allways use top quality oils and so on !

ITEM : BLACK 1995 R33 GTR NON V-SPEC - CONDITION : In great condition

MODIFICATIONS :

APEXI Power FC

GARRETT -5 ( GT-SS ) turbo's

NISMO intank fuel pump

NISMO fuel reg

NISMO twin plate clutch

NISMO air flow meters

NISMO LM GT4 rims

HKS lowered springs with rebuilt standard struts

HKS hard pipe kit

TRUST front pipe

TRUST 3 inch exhaust

TRUST air intake pods

SPLITFIRE coil packs

SPEEDLAB 120mm drag front mount intercooler

RDA slotted front rotors

CUSCO oil air catch can

PIONEER stereo with fusion - amp - sub - splits

Tinted windows

Full 3 point immobiliser

Interior is near spotless, Allways cleaned and looked after. Non smoker owners since new!

Car made 352RWKW on 18PSI ! Dyno sheet Available.

OVER $18K in labor and top quality parts have been bought and installed to this GTR in the last 9 months !! Previous to that car was stock !

Only top name quality parts used !

If your wanting a genuine 350KW GTR then this is it.

A full mechanical report including comp test ECT will be provided to show engine is in Perfect condition !

Sure ive missed something but you get the idea.

CONTACT : PM me

LOCATION : Adelaide

PRICE : $25K FIRM

Also if you dont know what your talking about, Please keep your comments to your self !! No test drives !!

PICTURES : will have some up next couple days , or can MMS some.

CONTACT : PM me

Edited by stylz7
Link to comment
https://www.sau.com.au/forums/topic/370389-black-r33-gtr/
Share on other sites

Some Pictures below people, Its best i can get at the moment, Its raining down in Adelaide and will be raining for next couple days.

Car has rego till end of year as well.

post-29615-0-70593300-1310202510_thumb.jpg

post-29615-0-07945600-1310202636_thumb.jpg

post-29615-0-65154800-1310202680_thumb.jpg

post-29615-0-49015800-1310202718_thumb.jpg

post-29615-0-70261200-1310202761_thumb.jpg

post-29615-0-14928000-1310202801_thumb.jpg

post-29615-0-88500600-1310202853_thumb.jpg

post-29615-0-74247600-1310203144_thumb.jpg

Edited by stylz7
Link to comment
https://www.sau.com.au/forums/topic/370389-black-r33-gtr/#findComment-5905165
Share on other sites

They roughly produce the same figures ( depending on the car and other mods )

My 33 gtr makes 352RWKW @ 18PSI with -5 garretts

Mate of mine 34 GTR makes 368RWKW with HKS 25/30's @ 18PSI

Edited by stylz7
Link to comment
https://www.sau.com.au/forums/topic/370389-black-r33-gtr/#findComment-5908379
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...