Jump to content
SAU Community

Big Single Turbo "5 Speed Manual" Toyota Soarer ****$11,000 For Quick Sale****

sky_34
 Share

Recommended Posts

sky_34 Explorer

sky_34

Posted
Posted (edited)

Hi I have up for sale is my toyota soarer, and below are some lists of what its got:

Electric Blue toyota soarer JZZ30 2.5L turbo

Rebuilt internal (still running in as i have only done approx. 200km since then)

car have just got a service 1 month ago with motul oil

18xxxxkm on the clock, well not really that km anymore due to engine has been rebuilt

Big single turbo conversion

Greddy/Trust TD06H-20G turbo

external wastegate

screamer pipe

oil catch return can

new NGK spark plugs

custom heat shield on turbo

K&N air intake with custom piping

"R154 5 speed manual conversion"!!!!!!!!

Microtech LTX-12s computer installed and tuned

Dyno tuned at 297.5hp @ wheels @ 14psi (Run in tune) as you can see the potential of this engine/turbo combination

Once its run-in with full tune, it should be able to do roughly 450hp@18~20psi with no problem.

*car was never boosted harder than 14, 15psi as I dont have a boost controller, it simply runs off the wastegate spring rate which is 14psi

18 inch Degeo slightly dished chrome wheels(in good condition)

2 new Nankang tires (in good nic)

wheel alignment and wheel balance done 1 week ago

twin 4 inch mufflers, 3 inch exhaust piping

custom front mount intercooler

custom body kit

rebuilt power steering pump

new electric window motor and assembly

custom blue/grey leather interior

custom DIY centre dash

JVC car mats

crystal look blue gear knob

Pioneer head-unit

turbo timer

Alpine ZR deep bass subwoofer

Alpine V12 amp

*things are removed from the car":(but do come with the sale)

GFB twin chamber blow off valve

Autogauge big shift light

Autogauge big monster tacho

HKS intercooler pipe piece

chrome gauge cup

rego til mid Oct

rwc upon deposit

--------------------------------------------------------------------------------------------------------------------------------------

Bads:

-few cracks and chips in the front spoiler and very minor crack in hood

-tear in under-bonnet lining

-synthetic blue leather insert in back seat damaged and foam underneath (due to left a leaking battery in the back seat)

*quoted around $200 redoing the damaged part on that seat*

-both seat belt buckles in the back needs replacing

-interior is in good condition but a few cracks wear and tear (common issue for soarer) here and there to be expected

in a 20 year old car.

-driver side head lights fallen a bit due to bolts broke off

-Dash LCD display works on and off, on and off, it works fine most of the time at night, but it seems lazy during the day

---------------------------------------------------------------------------------------------------------------------------------------

so, if you have always dreamed about having a big single turbo soarer in MANUAL, this is it! it wont disappoint!

Originally wanted $16,000 ( i know it might be a bit overpriced, well for the work that has been done on the car cost way more than

just $16,000, still) i have now dropped down to $11,000 to meet the market, so if you are in the market for a big hp manual soarer, please

do not hesitate to give me a call on 0433-350-626 or via TXT message if i cant take your calls due to i might be at work or even email at "[email protected]"

$11,000

thanks for your time reading!

post-51645-0-70228900-1311999163_thumb.jpg

post-51645-0-40118800-1311999179_thumb.jpg

post-51645-0-85739200-1311999189_thumb.jpg

post-51645-0-92198500-1311999198_thumb.jpg

post-51645-0-05546700-1311999210_thumb.jpg

post-51645-0-56522700-1311999218_thumb.jpg

post-51645-0-31626500-1311999226_thumb.jpg

post-51645-0-20964000-1311999233_thumb.jpg

post-51645-0-81362700-1311999249_thumb.jpg

post-51645-0-95390100-1311999240_thumb.jpg

post-51645-0-34133200-1311999258_thumb.jpg

post-51645-0-82329300-1311999264_thumb.jpg

post-51645-0-42228100-1311999271_thumb.jpg

post-51645-0-41320300-1311999295_thumb.jpg

Edited by sky_34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...