Jump to content
SAU Community

Rb26 Rwd Sump / Tomei Sump Baffle / Bride Seat / Rb26 Polished Engine Cover Set

DCIEVE
 Share

Recommended Posts

DCIEVE Mentor

DCIEVE

Posted
Posted

Bunch of parts for sale. Reasonable offers considered.

RB26 RWD Sump - High Capacity

Modified rb26 sump, diff casing etc removed and complete new winged 'bulge'. Sits dead level with the x-member so there are none of the usual ground clearance issues with most rb26 sump extensions.

Includes tomei baffle.

Milled dead flat so there are no sealing issues.

$750

motorin3.jpg

Bride Recliner

Average condition, one tear on the drivers bolster which has been patched. Includes a Bride seat rail to suit HR31

$400 with rail or $300 seat only

sample_9.jpg

RB26 Engine Covers

Includes cam covers, timing belt cover and coil cover.

Professionaly polished (cost over $500 alone)

'weld on' -10 fittings

$650

HR26DET_mail2.jpg

coldair2.jpg

I also have a spare plenum which is gold, make an offer. Or add the polished plenum to the above for 250.

PM or email [email protected]

krayzie32 Mentor

krayzie32

Posted
Posted

Do the cam covers have standard or aftermarket baffles?

if purchased as package with plenum will that include polished linkage assy?

Also what is it like to maintain this porn look?

Very interested.

DCIEVE Mentor

DCIEVE

Posted
  • Author
Posted

The baffles are standard and the polished linkage assembly isn't included.

There is a bit of maintenance with this stuff - but when you start out with something in that sort of condition it's quite easy to look after. All the hard work has been done getting it perfectly smooth so touching it up is very easy.

  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...