Jump to content
SAU Community

Recommended Posts

depends on what you want to run it on ?

how loud you want it?

cost range?

brand loyalty?

size?space you have

what ohm load your running it at ?

how much do you want to spend on wiring upgrades and alternators, battteries ?

do you want class, A, AB, D, Hybrid ? why mono ? you can do stereo amps as well ?

do you want sound quality, and control of your woofer ? or just bass

what size woofer, what box is it in ?

a 50 dollar 1500 watt mono block is nasty

and 2000+ dollars would one be fine

but Im sure as you can see you need to answer more questions to make a informed decision and be happy with it

why 1500 watts, ? RMS or max power ? real world ?

good power for a mono block, is 24,000 watts at 1 ohm. but you battery load would be retarded

Edited by sapphiregraphics

powering what ? a 900 watt sub from jensen or amp from jensen ??

the sony is a small step up at best ? it wouldnt be my first choice for a budget sub amp.

Edited by sapphiregraphics

Id suggest just getting a 900watt RMS (stated) or higher Kenwood mono D amp. Assuming thats a DVC/2ohm sub. They are cheap and dont sound too bad and will put out about 400RMS at 60hz at 2Ohm stable which is probably more than a sony "1500" could handle. But in all honesty sony dont really make high power subs so any $250 amp is likely to max it out

Edited by deano3350

it depends on all the thing i asked before?

and what kind of box the subs in

how loud do you want it?

do you have the subs model or ohm load, how many voice coils?

yada yada yada, as above

are you running a amp on the front speakers or deck power?

kenwood is decent cheap amp ?

the new sony speakers are rated around 1500watts "PEAK" power and around 400 rms, for anything more then a few seconds in the wrong box or clipping will kill the woofer ?

what are you trying to do exactly ? louder? deeper ? clearer ?tighter bass ?

it might be a waste of money to drop a big amp on a poor sub in a generic box , mounted wrong or x-over wrong ?

Are you after sealed or ported? how much space are you willing to lose? because if you want "reasonable amount of undistorted bass" your going to need to tune the box which Sapphire would be able to tell you all about

ok, well its a four ohm sub single voice coil, just want a resonable amount of undistorted bass

Like before

price range ?

amount of space you want to loose ? what kind of box do you have now ? sealed , ported, factory , generic , approx how big is it ?

sub model ? so I can see the Thiele parameters

what kind of music do you listen too mostly ? how loud ? and what source is it most of the time, MP3 , radio, CD ? some music lends itself to a different box , and same with loud volumes, safer for the woofer

what head unit type are you running, ? do you know the specs for line out voltage ? because if your amp needs high level inputs or converter that will make a difference ?

I take it this is in a R31 4 dr ?

do the front speakers use a amp or deck power ?

without answering these questions its hard to help you find options , just throwing a 2000 dollar amp on it wont make it sound better if its in free air, or the deck has convertors and playing MP3 at low bit rates

this might be as simple as a few bucks worth of poly fill, and reseal the woofer, change the crossover point or face the box another direction to make it sound better ?

about 300 bucks maybe more, space im happy to loose most of the boot, the box is a 50 litre ported, its an xploid 15 1500w thats all i know, i tend to listen to linken park, acdc etc in high quality mp3, im running a sony xploid 4x45 watt?, front speakers are deck power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...