Jump to content
SAU Community

Recommended Posts

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Link to comment
https://www.sau.com.au/forums/topic/375114-fs-c210-coupe-parts-for-sale/
Share on other sites

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

PM sent..

Cheers

This stuff is so small it's almost embarrassing to ask but... I need the plastic plugs (one each side) that blank off hole that gives access to the bolt in the bottom of the front quarter panels. Also I need the rubber surrounds for the little button inside the door jam that turn the interior light on and off when you open the doors. If you are in Vic I'd make a visit and pick out more stuff too.

Rubber grommet between the radiator support and coil (passenger side) that goes from engine bay into the guard.

Also the little clip that holds the bonnet stand onto the radiator support.

The sun visor clips on the ceiling that clips the sun visors up.

Centre console?

plastic clip that holds the two steel spring/rods together that lifts the boot. its right in the middle, white thing.

how bad is the front bumper?

cigarette lighter if it still has the rubber bit on it so it's not loose in the hole.

the passenger side cover underneath the dash, covers the fan blower.

I'm sure there's more will go and look at the car tomorrow.

This stuff is so small it's almost embarrassing to ask but... I need the plastic plugs (one each side) that blank off hole that gives access to the bolt in the bottom of the front quarter panels. Also I need the rubber surrounds for the little button inside the door jam that turn the interior light on and off when you open the doors. If you are in Vic I'd make a visit and pick out more stuff too.

Hi Drew,

i have the rubber button for you mate, come down when you have time..also the mr30 blank cluster plugs wii do the job for your holes

on your guards, you need to ""play with them"" but you will get the same results 90%

cheers

Rubber grommet between the radiator support and coil (passenger side) that goes from engine bay into the guard.

Also the little clip that holds the bonnet stand onto the radiator support.

The sun visor clips on the ceiling that clips the sun visors up.

Centre console?

plastic clip that holds the two steel spring/rods together that lifts the boot. its right in the middle, white thing.

how bad is the front bumper?

cigarette lighter if it still has the rubber bit on it so it's not loose in the hole.

the passenger side cover underneath the dash, covers the fan blower.

I'm sure there's more will go and look at the car tomorrow.

Hi socrates,

i have one sun visor clip, also a clip that holds the bonnet stand, not original use poly urathane to hold in place

it will do the job, also i have a spare cigarette lighter, and the passenger side cover, its for the air con model

but will do the job and its in good condition brown..give me call if you need other things i might have them..

Hey guys sorry i haven't had time to get back to you. I will have a look in the shed over the weekend and get back to you asap.

Passin ewe i haven't received any email from you so send through another email or pm me.

Also it is not a complete car that i have, just a shed full of parts.

Hi LUVC210, I used your email link in your initial post, Anyway I've resent the message I had in sent items, If that hasn't worked, I'm after side main windows if they're not scratched. What colour are interior bits?

Regards Ricky

  • 4 months later...

Hi mate, would you happen to have the fuel filler complete unit. many thanks

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Hi mate, looking for a complete fuel filler unit for a C210, let me know if you have one and are willing to part with it.

thanks again

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...