Jump to content
SAU Community

Recommended Posts

Hey guys just wondering if anyone has one of those autogauge digital tacho and shift light in 1 that just jap sell and are they any good I want to get a shift light and tacho but dont want a monster tacho or anything

Yes that's exactly it it's made by autogauge I have a rb25det in a Vl and the standard tach does nit work so I was thinking one of these however unsure how it will go with a aftermarket ecu

Ok. So it seems that it is more accurate than the hand controller as it appears to react quicker. Most of the time it is within 50rpm when stable. Just pause it constantly through the clip to compare them.

http://www.youtube.com/watch?v=ZugGGVrJW9M

Yeah I'd say definitely more accurate because it is updating the rpm a lot quicker than the powerfc. The other tacho seems to change about 3 to 5 time for the powerfc's one time. Just gotta pause and play it real quick.

I'm assuming your being sarcastic there as many people on here don't like Vls

Mate I reckon vl's are great. You put any vl with the same power and grip as any skyline and which one comes first? vl every time. But the interior of the vl lets it down. That's my opinion.

On the subject of setting the shift light, it is controlled by the button in the centre of the tacho. You press it and it will go up or hold it and then press it and it will go down. It is just like any aftermarket tacho. They are a standalone unit. I was just using the handcontroller for comparisons sake before.

Yeah what I meeant is say I want the shift light at 6000 I get to 6000 on the hand controller say the tacho 5980 I set it at that that's what i meant

Oh ok I get you now. The tacho is adjustable in 100 rpm increments. I can feel another youtube clip coming on. :D I think mine is set to 6800 or 6900. Most of the time I actually shift at 6500 or 6600 cos it feels better there. i only really rev it to 7000 or so if I need the speed from that particular gear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...