Jump to content
SAU Community

Recommended Posts

Up for sale is a 1995 R33 GTR Vspec.

It has the following.

Wolf V500 Ecu

Npc Big mouth track button clutch rated at 600hp.

2860r-5 turbos

Tomei dumps

Cams(unknown size/duration were in car when purchased)

Nismo Fuel Pump

Nismo Fuel Reg

Nismo 600cc Injectors

HKS Hard piping

Cooling pro 600x300x100 intercooler

Greddy Turbo Timer

Profec B boost controller running 12 and 21psi(low and high)

Hicas Locking bar.

Momo Trek steering wheel(standard GTR wheel currently in place)

18x10.5" Enkei Rpf1s with 265 Federal tires.

Current tune by EFI at 21psi is 455RWHP(on a safe tune, require bigger exhaust, fuel pump and injectors to run E85 for more power)

100,000Km service was carried out when I purchased the car a year ago. at 68thousand kms.

Comes with Carbon spoiler, Carbon lip(damaged however replacement on its way from japan)

Also comes with another set of GTR struts with higher springs, original purple spoiler blade.

Very quick car, always washed looked after however the usual 16 year old marks a few scratches here and there nothing major.

I will not part with the car for nothing but if the right offer comes up and I can not refuse we'll take it from there.

The original import papers(Do not have) rumored this car to have a 2.8 stroker which is not confirmed.

Will consider swaps however must be something of interest with cash my pending on offer.

Contact by 0401 628 111.

267640_145870642155426_100001974734909_300428_7358100_n.jpg

263194_145870732155417_100001974734909_300429_4017721_n.jpg

262008_145871568822000_100001974734909_300431_6718380_n.jpg

261260_145871685488655_100001974734909_300432_7829183_n.jpg

223758_155140051228485_100001974734909_326067_7667894_n.jpg

Edited by EAT26
Link to comment
https://www.sau.com.au/forums/topic/376530-eat26/
Share on other sites

http://www.carsales.com.au/all-cars/private/details.aspx?R=11273429&__Qpb=1&Cr=4&__Ns=pCar_Ran kSort_Int32|1||pCar_PriceSort_Decimal|1||pCar_Make _String|0||pCar_Model_String|0&keywords&__No=15&__ N=1216+1246+1247+1252+1282+4294963846+4294963593+3 96+414+900&SearchAction=N&silo=1011&PriceTo=414&se ot=1&PriceFrom=396&tsrc=allcarhome&__Nne=15&trecs= 24&__sid=12EEE4FC2E2B

Will consider offers!

Link to comment
https://www.sau.com.au/forums/topic/376530-eat26/#findComment-6016131
Share on other sites

Will consider swaps of a S13/180/R32 rolling/project with cash adjustment my way looking for a new project and a decent R32 GTST or 180/s13 with a Ls is a possibility ;) haha

Link to comment
https://www.sau.com.au/forums/topic/376530-eat26/#findComment-6016547
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...