Jump to content
SAU Community

Recommended Posts

ok may be a dumb n00b query but here goes...

when i take my car (95 NA R33) to the redline in 1st gear it starts 'coughing' until i change into 2nd and then at the redline in 2nd till i hit 3rd..

its sort of like a misfire but without the sudden lurching juddering loss of power.

would there be a limiter on the car? or could it be a fuel issue? or could i just be a really crap driver :)

the car is standard apart from an aftermarket exhaust.

Link to comment
https://www.sau.com.au/forums/topic/38008-my-r33-has-a-cold/
Share on other sites

your speedo is getting less accurate as you go faster. Considering 10% accuracy allowance as per ADR rule, a ground speed of 180km/h where your speed limiter kicks in may be shown as 180km/h plus or minus 18km/h... so can be somewhere from 162km/h to 198km/h on your speedo (+/-2cm past ur 180 mark). Speedo also get less accurate as car is older, sometimes by as much as 10k at only 60km/h!

ask a copper to double check your ground speed with his radar, then you'll probably find out for sure :D

Link to comment
https://www.sau.com.au/forums/topic/38008-my-r33-has-a-cold/#findComment-767616
Share on other sites

not all speed limiters limit you to 180klms, in a WRX it's 205 for an auto 210klms for a manual.

So it wouldn't suprise me if you could get up to 220-230klms before it limits the speed, you'll crap your self when it happens the first time.

As it feels like your've just totally f**ked your engine, real bad.

That's also saying you still have the speed limiter or it's turned on.

Link to comment
https://www.sau.com.au/forums/topic/38008-my-r33-has-a-cold/#findComment-768080
Share on other sites

Hey asylum,

It does sound like the rev limiter, mine makes the cold sounding noise (even tho my friend thinks its a sweet noise) when it hits redline. :)

But if you are not sure.. take it to your mechanic and ask him.. I'm sure if he is a good/nice mechanic he wont charge you for this. :rofl: Or alternatively try to drag a car knowledgable friend next time and ask him when it happens again.

Link to comment
https://www.sau.com.au/forums/topic/38008-my-r33-has-a-cold/#findComment-768780
Share on other sites

Hey asylum,

It does sound like the rev limiter, mine makes the cold sounding noise (even tho my friend thinks its a sweet noise) when it hits redline. :)

But if you are not sure.. take it to your mechanic and ask him.. I'm sure if he is a good/nice mechanic he wont charge you for this. :D  Or alternatively try to drag a car knowledgable friend next time and ask him when it happens again.

yeh i like the sound too but i don't wanna kill my engine hehe

cheers guys :rofl:

Link to comment
https://www.sau.com.au/forums/topic/38008-my-r33-has-a-cold/#findComment-768982
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...