Jump to content
SAU Community

Recommended Posts

Purchased the with engine damage. And have had the engine rebuilt with the following:

Wiseco Forged pistons and rings 11:1 +020 overbore

All Machine work etc

ACL race series Bearings and ACL thrust washers

ARP head studs and Nuts

Nissan OE gasket set and sealant

Nissan OE rear main housing

Nissan OE water pump

Mishimoto thermostat

Also replaced leaky Rocker Covers

Gearbox was also replaced approx 6 months ago by previous owner with a NEW one, not reconditioned (have receipts)

Chassis KMs: 1088xxkms, Engine was pulled out and rebuilt at 106700kms

Standard Premium specs are as follows:

+Leather/Suede Seats

+Bose Stereo

+Dual Zone Climate Control

+Auto Xenon Headlights

+Privacy Glass

Aftermarket Parts:

+Vortech Supercharger Kit @ 8.5psi

+Borla Cat-back Stainless Exhaust

+KS Auto Burnout Carbon Fibre Body Kit

+Carbon Fibre Engine Cover

+Engine Damper

+Tein CS 16 Way Adjustable Coil Overs

+Whiteline Adjustable Swaybars Front n Rear

+3-1 Headers

+Tints

+Nismo Floor Mats

I have since added:

+Rays R35 GTR Wheels powdercoated Satin Black; 20x9.5 +45mm w/ 245/45 Kumho KU31s, 20x10.5 +25mm w/ 275/30 Bridgestone Potenza RE050 (Fronts are new, Rears about 80%)

+Akebono Big Brake Kit; F:4pot 355mm Crossdrilled and Slotted Stoptech Rotors, R:2pot 350mm Crossdrilled and Slotted Stoptech Rotors (All new)

+Taillight/Headlight/Roof Overlays

+Replaced torn I/C piping

+Have new Gates s/c belt to go on

+Whiteline bushes in the LCA

I have spent about 20k getting the car to where it is now and the previous owner had thrown about 30k on it. Also had issues with it stalling but have since had the idle increased and solved the problem. Car was tuned at ASG, putting out 343hp and 418nm torque @ 8.5psi (need to scan new dyno sheets)

I am after $29k for the car as is, not seperating wheels unless I get a good offer. There are a few issues with the car which I have taken into consideration with pricing.

Stock Auto Premium V35s are currently for sale from 25k-40k. This is basically brand new engine/transmission/brakes/tyres wise with a whole lot of extras. First service was done @ 107800kms with new oil filter and Mobil 1 5w-40.

Now the bad:

- Central Locking doesn't work (common problem, any alarm install place can fix this)

- CD Player has CD stuck in it (again common problem, but has AUX inputs to connect an iPod/external player)

- Has some small dents on the bonnet (dent puller guy will be able to get it out)

As mentioned I have taken these into consideration with the price, so don't bother lowballing. Genuine enquiries only, and don't expect test drives, I will be the one driving. PM on here or call/txt 0403015200 (Kuek)

Rego expires sometime in Feb 2012

Will come with BRAND NEW CF Front lip and Sideskirts (cost me 2.3k from Japan). S/C has had a rebuilt with new seals, new belts, has new airfilter. Its in top mechanical condition! Can negotiate a lower price without rims/kit. Will be parting out the car in the new year if it doesn't sell as is.

Pics:

v35a-1.jpg

brakes.jpg

rear-3.jpg

debadged.jpg

  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...