Jump to content
SAU Community

Recommended Posts

Hi Guys,

Putting out the possibility of selling the entire engine setup of my RB26/30 to make way for a new project car. The specs are below.

Built By RE Customs

-R33 RB26 Head

Greddy Cam Gears

Jun Crank Collar

-RB30 Block

9:1 Comp Ratio

Cometic Head Gasket

Spool Rods

CP Pistons

-Exhaust Side

Exhaust side ported and polished

Garrett GT35r V-Band 0 .82 Turbocharger (housing ceramic coated) inc all braided lines

6boost Steampipe Manifold (ceramic coated)

Tial external 60mm wastegate (ceramic coated) inc all braided lines

Screamer Pipe (Off 60mm wastegate vented to atmo, ceramic coated)

-Intake Side

Intake side port matched to runners

OEM GTR Plenum + Individual throttle bodies

K&N Pod Filter

-Fuel System

Twin Entry Greddy 10.5mm Fuel Rail

SARD 1000cc Injectors

Tomei Type L Fuel Pressure Regulator

Engine was serviced every 2,500kms for the first 10,000kms and then every 5,000kms after that. Since the build it has only run 15,000kms. Car made 403rwkw with a Garret GT35r 0.82, I have yet to see a 3L gt35r make power this efficiently. Drop this engine combo in any setup with a decent size turbo and you WILL make serious power. The entire build over a number of months cost me in excess of $25,000.

29180110150391873439120.th.jpg img0129dp.th.jpg

Im probably missing some info so If anyone wants more infomation please post and ill try my best to get onto it.

Looking for $25,000ono

SMS/call 0421691338

or PM

Link to comment
https://www.sau.com.au/forums/topic/385785-400kw-rb2630-engine-setup/
Share on other sites

Turbo included. The comment just meant that if you wanted to go bigger, you wouldn't be restricted engine wise.....to a certain extent I guess.

The power was made on a r34 gtt so RWD.

I'm also open to trades for complete rb25 neos or rb26s

Edited by Jap_Muscle
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...