Jump to content
SAU Community

Wtb: Stock Or A/m Low Mount Rb20/25 Turbo Ex Manifold + 40-44Mm Vband Ext Gate


Recommended Posts

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

I have a manifold in Brisbane $20 plus post

pm me for detail

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

hey there bud , how are ya , sure i can help you out hey .

i can help you out with both low mount manifolds but recommend you go the stock cast iron as its more reliable and can withstand heat and cracking not like alot of the stainless manifolds out there on the market .

also can supply you any external wastgate you like from a tiall 44mm mvr water cooled external wastegate

tial-hw-wg44wpair_m.jpg

or to a turbosmart 40mm external comp wastegate or

turbosmart-comp-gate-40mm-wastegate-0.jpg

as you said a turbosmart 45mm pro gate .

4639.jpg

i am also in sydney , open 7 days long hours and hope we can sort this out for you asap man .

i am from western suburbs , liverpool area .

let me know if your interested mate and if there is anything else i can help you out with dont hesistate to ask hey

thanks for your time , anthony

Edited by DRIFT RACING INDUSTRIES

We can supply Tial or Turbosmart wastegates

Send us an email or PM if you are interested, [email protected]

Look forward to hearing from you!

Jez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...