Jump to content
SAU Community

S14 / S15 Parts Inc: Xtreme 6 Puck Clutch Kit, Ca/rb Ngks, Hybrid Intercooler, K&n Panel Filter, Used Oem Mounts


Recommended Posts

Located in Southern Suburbs of SA.

Pickup preferred but will post if necessary.

No low-ballers please but willing to consider somewhat reasonable offers.

Reason for sale is because I have since upgraded and no longer require the current parts:

Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO

Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April.

The entire kit is being sold including:

  • Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw)
  • Lightweight moly flywheel (single-mass, less weight than the dual-mass)
  • Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?)
  • Xtreme Pressure plate
  • Fork pivot ball

The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out.

The part number for it is: TB40017

Part is only about $50 direct fomr ACS in Wingfield, SA

Link:

http://www.australia...sp?parentid=118

Picture attached of clutch and pressure plate:

wp000152.jpg

wp000155h.jpg

throwout.jpg

PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps!

Great for decent power gains required on a budget without much pressure drop.

Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core.

Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core.

If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK!

hybridfmic.jpg

S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO

Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy.

knfilter.jpg

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one.

2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so?

mount1j.jpgmount2v.jpg

mount3q.jpg

8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO

sparkplugs.jpg

Will post some items if they don't sell locally except for the intercooler.

In regards to contacting, please PM me and we can go from there.

Cheers.

Edited by Ruff Ryda

NOTE: Fork pivot ball above is included, it won't be sold as a seperate item so please disregard the listing where it mentions it's for sale at $30 ONO.

  • 1 month later...

Bump.

NOTE: Clutch is XTD, the fly and pressure plate is Xtreme.

Any offers?

Edited by Ruff Ryda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...