Jump to content
SAU Community

Rb26 Ces Ceramic Dumps, R34 Gtr Drivers Seat, A-Tech Final Speed Rims

rowan
 Share

Recommended Posts

rowan Collaborator

rowan

Posted
Posted (edited)

ok selling a set of 5 yes 5 a-tech final speed rims realy good offset for standard gards might just need a slight roll specs

3/ 17x8 +22 fronts

2/ 17x9 +15 rears

tires r pretty shit $700

post-8451-0-96303100-1326149261_thumb.jpg post-8451-0-53417400-1326149312_thumb.jpg

r32/r33/z32 and maybe r34 front coilovers there tein hr they r perfect askin $350 thats f*kin cheap considering a full set will cost u $1000 upwards all u have to do is get a rear set

post-8451-0-56412800-1326149363_thumb.jpg post-8451-0-48486900-1326149498_thumb.jpg

rb26dett coilpacks suit rb26 or rb20 will give rb20's a way better spark $150

r34 gtr drivers seat pretty rare in black will bolt straight up in skyline, will also bolt into sil/180 just have to drill one hole its in realy good condition $600

a pair of ces ceramic dumps direct replacement for standard, im goin single setup so there no use to me, the cost $940 selling $600

post-8451-0-70542300-1326149565_thumb.png

more pics to come msg or ring on 0422412194

Edited by rowan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...