Jump to content
SAU Community

Recommended Posts

ITEM: TRUST (Quaife) GTR 6-Speed H-Pattern dog gearbox with billet centre/sandwich plate

TO FIT: RB26's

CONDITION: Excellent - has been rebuilt with new bearings etc

LOCATION: Sydney.

PRICE: $7,000 for the box (minus transfer case)

PAYMENT & DELIVERY: Cash pick up or direct deposit; postage extra

CONTACT: via PM

PICS: soon

Selling this box as it is no longer suitable for car's application. Just spent $1,000 rebuilding box and replaced 3rd gear by Terry @ Award Diff & Gearbox. Said that this is one of the best condition TRUST dog boxes he has seen.

Box was 'sold pending payment' but have not seen any money so it's back up for sale - first in with the $$$ gets it. No timewasters please.

post-4183-0-57379600-1326285719_thumb.jpg

post-4183-0-01935500-1326285743_thumb.jpg

post-4183-0-59993900-1326285754_thumb.jpg

post-4183-0-53105300-1326286132_thumb.jpg

post-4183-0-77578200-1326286139_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/387950-trust-quaife-6-speed-dog-box/
Share on other sites

  • 2 weeks later...

Sorry, just saw your post, tk80.

Third gear didn't break. Found a small crack in one of the teeth so decided that it would be best to change it. Parts are very easy to source - I had the gear shipped to my door within a week of ordering. Terry at Award has rebuilt plenty of these and there aren't any problems in sourcing parts (Quaife in UK via local distributor).

I have personally run 600rwhp through a Trust box. I know of other cars running more than that (700+), however, unsure of any maximum. I guess it also comes down to how you drive them and the clutch you are using.

  • 2 weeks later...

Yes, comes complete with gear lever + housing, gate, and switch etc - all you need is your own transfer case. It does not have the clutch fork.

I will also throw in a brand new TRUST 6 speed chrome gearknob.

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Is the Box still for sale? Would you be able to ship it to brisbane? I have a 32 gtr making 538rwhp and am thinking about going this option, what are they like to drive as i have never driven one with a dog box in it? I have a custom made NPC clutch which took a little getting used to but it should just bolt straight up right? Is it still out of car or re you using it at the moment?

  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...