Jump to content
SAU Community

Recommended Posts

Genuine RZ, not a NA-T conversion, 6 speed manual, stock turbos, minor modifications, all brake, suspension and BPU modifications already done so perfect base for someone looking to get some big HP out of it (thats the reason I bought it) not listed for a quick or desperate sale, will only sell for right price, already the cheapest supra online, genuine reason for sale, continue reading if you are still interested :)

2nd australian owner, previous owner mature student, imported it in 2006 with 65,xxxkm's on it, and no modifications, performed a $1500 major service straight away, then sold to me with 80,xxx, I have owned it for less than 1 month, all I've done is had a full service, all fluids flushed, also got the windows tinted, 15% all round, 5% on rear windows, life time warranty for that aswell, planned to have a full detail done to it, but the weather won't let me, driven it 2 full tanks so far so just under 1000km's.

Genuine reason for sale, I can't get the car up the driveway and we've been battling with the real estate and council to have it fixed since the new year.

I HATE having to park my car on the road, not only can i not garage it, but parking on the road is impossible because there are bus stops on either side of the road and I already received a $350 fine for half my car being inside the bus zone which is literally infront of my driveway... since it is a daily, I can not drive in and out of the driveway several times a day.

rego till late May 2012

all mods have around 10,xxxkm's on them.

aircon system rebuilt and regassed during major service.

Genuine Black Leather MOMO Steering wheel

aftermarket S2 headlights with 6000k HID's professionally installed so they aren't blinding everyone on the road

Turbo timer

headunit with iPod connectivity

Apexi air filter

Genuine Volks SF Winning rims with CS2 tires 18" x 9 front with 245/40 +35 offset and 18" x 10 rear with 275/35 +42 offset

Greddy 600 x 300 x 75 FMIC

Tein Supersports Adjustable Coilovers

Front and Rear Struts

Upgraded 4/2 big brakes with Project Mu Type NS brake pads

Endless Steel Braided Brakelines

Kakimoto catback exhaust, sounds dead stock on idle, but mental above 4000rpm

Black Widow alarm system (more details given after deposit has been left for security reasons)

Blitz SBC ID-3 boost controller

Exedy OEM replacement clutch with plenty of life left only installed under 10,xxxkm ago.

you can also have: still boxed, brand new project Mu brake pads, and Tial BOV.

Interior is literally immaculate, one of the cleanest interiors I've seen and considering the age of this car it is very unusal.

Exterior not 100% no body damage or rust, but paint has faded in some areas..

previous owner had it dyno'd at 210rwkw with the exhaust, filter, and 1bar boost, it now also has a FMIC, but no new dyno read out so yeah not sure, engine remains untouched, no tampering with TTC mods or anything like that.

unsure of genuine km's but at least you have the peace of mind knowing all major services have already been done here in oz, including belts, harmonic balancer, transmission fluid, diff oils, all filters etc, including just recently oils reflushed and replaced less than 1000km's ago.

I will keep the car if I don't sell within the next 6 weeks because by then my driveway will hopefully have been fixed and I won't have any reason to sell it, no rush to sell, so dont get cute with the offers, test drives available, because I no first person to drive it will buy it :)car located hornsby area. pm for more details

p.s. Paid to have a VEDA check done and printed so you can have a look and I've saved you $60 :) Inspected this car 3 times, twice with different mechanics before I purchased it, no leaks or mechanical issues found..

post-64500-0-01339500-1328234989_thumb.jpg

post-64500-0-84310300-1328235006_thumb.jpg

post-64500-0-15820900-1328235014_thumb.jpg

Edited by ShaolinCurse
Link to comment
https://www.sau.com.au/forums/topic/390376-nsw-95-tt-supra-6spdmanual-18000ono/
Share on other sites

Just a thought. I have had low cars my whole life and my houses also have a crappy high gutter.

For the interim, maybe you should just get a big plank of wood and put it in the gutter so it acts as a ramp. Atleast then you can garage it.

It would be a shame to sell it becuase of this but regardless, best of luck with the sale.

Edited by iwanta34gtr

thanks mate for the wise words, I will also post of picture of my driveway which will in itself explain to you why 2 planks of wood will not suffice. cheers anyway.

Bugger, sorry to hear. Thought it may have been worth a shot (atleast to save you from the fines).

Dont mean to pull your thread off topic. Nice car, best of luck again with the sale / driveway - whatever comes first.

Cheers mate.

no worries mate, like I said, eventually the Driveway will be fixed and I'll keep it, but definently not an option ATM since there is no way around my problem.

post-64500-0-49889600-1328236335_thumb.jpg

post-64500-0-79553800-1328236413_thumb.jpg

Edited by ShaolinCurse

got a high number of intersted people considering it's only been on 2 forums for 24 hours, got 1 person coming to see it today 2 others communicating via SMS and 2 interstate buyers which seem interested..

please note, my sale is not desperate, as I mentioned in the ad, if I don't get my asking price I won't let it go because my problem is not with the car itself just its location and that will eventually be fixed anyway.

I will happily consider offers but nothing ridiculous.

thanks yo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...