Jump to content
SAU Community

Rb Metal Turbo Intake Pipe 3 Inch With Plumback Bov Connections. Melb Pick Up Or Can Post

G4orce
 Share

Recommended Posts

G4orce Veteran

G4orce

Posted
Posted (edited)

Hey guys, i have a Professionally made custom Turbo 3inch intake pipe , allot of effort has been put into this pipe.

Will suit stock turbo's on a R32 Gtst, R33 Gtst ,R34 Gtt and other turbos such as TD06 etc.

Welded on the intake pipe it has the 2 fittings one for the stock plumback bov connection and one for oil anti-pollution. Basically the two connections that are on your stock intake pipe.

This thing sounds nuts when its on your car. Increases induction noises significantly, such as turbo spooling , flutter etc.

You will pick up all the chix in your area with this pipe! yes every single one of them including the ugly ones :banana:

anyway ill move on from the jokes, other than the sound difference hard pipes are needed when you start making decent power, the stock rubber intake pipe gets sucked in and this doesn't.

The connection to the afm size measures 90mm so it suits both stock afm's and z32 afm's, i took a pic below just to show you with the z32. please note z32 afm is not included in the sale

It has been coated with heatproof 3M Matte black paint to give it the complete stock stealth look which is in excellent condition with no scratches.

Asking $250 FIRM and ill throw in the blue rubber joiner so you can mount your afm.

Pick up is from Taylorslakes 3038 Melbourne or can post Australia wide for an extra $15

I Don't own a skyline anymore and there's no point of me treasuring this for any longer.

PM / CALL OR SMS ME ON 0422-756-270 if interested. Cheers!

Double click on images below to Enlarge

62img0169.th.jpg

74img0165.th.jpg

15img0160.th.jpg

75img0167.th.jpg

74img0168.th.jpg

24img0178.th.jpg

25img0176.th.jpg

61img0189.th.jpg

17img0173.th.jpg

Edited by G4orce
lach88 Collaborator

lach88

Posted
Posted

is this intake pipe angled to be able to attach onto the standard air box? or close to it?

if so i'll take it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...