Jump to content
SAU Community

Recommended Posts

GENUINE Z32 AIR FLOW METER

- Large 80mm diameter - most common AFM upgrade

- Genuine BOSCH/JECS - manufactured in Japan
- Wiring diagrams also available on request
- Can also supply TOMEI Plug $40 w/ wiring OR BOSCH Plug $30 w/ no wiring.
- OEM # 22680 30P00 (VG30DETT engine)

$345 $285 incl. Delivery >> SAU Special

BUY_BUTTON.gif

* This is an Australian delivered product with a full national warranty.


AFM-029_400.jpg


AFM-029_box.jpg

  • 3 months later...

New batch just in!

Feel confident in that you are purchasing a Genuine Z32 AFM.

BOSCH Plug - $25 with same day dispatch!

  • 2 weeks later...
  • 1 month later...

deilvery to sydney 2763 with plug to suit r34 in stock?

Hi,

Tomei Plug w/ wires would be $320 or BOSCH Plug w/ no wires would be $310 both incl. delivery.

Being a larger AFM then the stock 70mm one some modifications will be required.

- Brendan

  • 1 month later...
  • 6 months later...
  • 1 month later...

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

Hey!

Correct the BOSCH plug comes with no wires and the Tomei unit comes with wires. In most cases the Tomei one is an easier choice to work with.

- Brendan

  • 3 months later...
  • 11 months later...

100% Genuine unit's only!

​.... for those note sure if what they have is a genuine unit just check if the sensor inside has a red coloured band around it!

  • 2 weeks later...

Hey mate, do you have any plugs to for the Z32 to be used on a S15?

Yo!

Easiest option would be a Tomei plug which you can wire up to the original harness.

Let me know,

Brendan

(VM)

  • 10 months later...


  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...