R32 Gtr Brake Setup With Two Piece Rotors, 16 X8 +11 Avs Model 6 Rims With R888 Toyos, Super Advan Sa3 Rims With Slicks

[sprint]

R32 GTR Brake Setup- with two piece rotors (32mm thick when new, now just below 31mm) , Braided Brake Lines, DS2500 Ferodo Pads (60% meat left) and R32 GTR Calipers

Disks may need a slight skim to clean them up. Setup fits under 16 inch rim.

$550 firm (disks alone cost me $800)

16 x8 +11 5 Stud AVS Model 6 rims with R888 toyos (225/50/16) . Rims need a clean and paint, but offset is great if you want a wide stance. R888's still have another 3-4 track days left in them

$500

Super Advan SA3 Rims 5 x 114.3 17 x 8 +30 offset (comes with centre caps as well) wrapped in Dunlop Full Slick tyres. Cycled for 2 sprint events by me and once on a mini cup car so a good 60% tread left on them.

Tyre size is a 215/45/17. Went around Sandown 1.5secs quicker on these full slicks then my 225/50/16 toyo R888's.

Rims have some gutter rash (and are in no means perfect as can be seen by the photos). Fronts have been balanced but rears I didn't bother. Tyres are marked so you can put them straight onto your car without the need to balance them.

$600

5 stud 16 inch spare wheel and jack

$80

Sash

Pick up only unless individual organises own freight

Melbourne (Greenvale)

0409707054

Edited February 27, 2012 by sprint

[sprint]

For those that have PM'd, it is Front GTR brake setup and not Front and Rear